Midea NY2009-20M Owner's Manual

Midea NY2009-20M Owner's Manual

Oil filled heater
Hide thumbs Also See for NY2009-20M:

Advertisement

OIL FILLED HEATER
OWNER'S MANUAL
OIL FILLED HEATER
MODEL: NY2009-20M / NY2311-20M
READ AND SAVE THESE INSTRUCTIONS
Attention: Pictures in the IM are for reference only.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NY2009-20M and is the answer not in the manual?

Questions and answers

Summary of Contents for Midea NY2009-20M

  • Page 1 OIL FILLED HEATER OWNER’S MANUAL OIL FILLED HEATER MODEL: NY2009-20M / NY2311-20M READ AND SAVE THESE INSTRUCTIONS Attention: Pictures in the IM are for reference only.
  • Page 2 SAFETY INSTRUCTION Warning : In order to avoid overheating, do not cover the heater. 2. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
  • Page 3 CAUTION — Some parts of this product can become very hot and cause burns. Particular atten- tion has to be given where children and vulnerable people are present. 8. This heater is filled with a precise quantity of special oil. Repairs requiring opening of oil-container are only to be made by the manu- facturer or his service agent who should be contacted if there is an oil leak.
  • Page 4 PART FIGURE Power Switch Knob Thermostat Knob Cord wrap Caster assembly Use of oil filled radiator 1,Turn the heater upside down. 2. As shown in figure 1, align the mounting hole of a set of caster assembly and install it on the screw of the caster pad plate at the end of the radiator fin, and The other caster assembly is aligned to the screws mounted at the bottom of the control box.
  • Page 5 OPERATING INSTRUCTION [Inspection before start] 1.The power cord shall not be damaged or fractured. 2.Please verify the rated current of the power socket is in line with the requirements in the table above and is equipped with a safety grounding device before use; otherwise, replace the socket.
  • Page 6 CLEANING AND MAINTENANCE INSTRUCTION 1. The electric heater should be cleaned regularly to wipe out the dust on the surface of flanges. As this may influence the radiating efficiency. 2. Disconnect electricity supply and allow radiator to cool, wipe out dust with a soft damp cloth.

This manual is also suitable for:

Ny2311-20m

Table of Contents