U Sing The P Honebook; Modifying And Erasing Phonebook Entries; Connecting To A Global Remote Phonebook; Entering Names In The Phonebook - Aethra AVC8500 Use And Installation Manual

Using the Phonebook
Codec allows use of either a local phonebook or a phone book on a remote server (LDAP H.350 protocol).

Entering Names in the Phonebook

From the Home Page, go to the "PHONEBOOK" icon and press OK, or press the "PHONEBOOK" remote control key.
Move the arrow keys to the "ENTER" icon and press OK.
The following page will be displayed:
Enter data in the phonebook by using the remote control alphanumeric keys or the virtual keypad to fill out the available fields.
Choose the call configuration to record the connection details for this user (Interface used (ISDN, IP, SIP) and
transfer rate)
Enter NAME and COMPANY
Enter the prefix and number
Using the arrows move to the SAVE icon to save the new data or to CANCEL to exit and press OK
Note
If you want to store an audio call only entry, you must check the Speech box.

Modifying and Erasing Phonebook Entries

To modify a phonebook entry:
1) Select the desired entry and press OK
2) Move to the "MODIFY" icon and press OK again
3) Enter modifications and save them
To erase an entry in the phonebook:
1) Select the desired entry and press OK.
2) Move to the "CANCEL" icon and press OK (the codec will ask you to confirm deletion).

Connecting to a global Remote Phonebook

To connect to the remote server, move to the drop down menu and select the desired server IP address. The phonebook will
now operate as described above.
Note:
To correctly configure remote server connection parameters, please contact your network administrator.
26