Page 1
Phone : (770) 282-8686 WASHLET Warranty Registration and Inquiry For product warranty registration, TOTO U.S.A. Inc. recommends On-Line Warranty Registration. Please visit our web site http://www.totousa.com. If you have questions regarding warranty policy or coverage, please contact TOTO U.S.A. Inc., Customer Service Department, 1155 Southern Road, Morrow, GA 30260 (888) 295 - 8134 or (678) 466 - 1300 when calling from outside of U.S.A.
What functions are available on your product? Table of Contents Part No....4 Safety Precautions Keep It ..11 Operational Precautions ......12 Parts Names ......14 Preparation Clean Product name (Model) WASHLET ....16 Basic Operations SW3074T40 Part No. Mechanism of Auto Functions ...
Safety Precautions IMPORTANT SAFEGUARDS WARNING READ ALL INSTRUCTIONS BEFORE USING Do not use other water then allowed by the laws and ordinances of the Symbols and Meanings region of use. Only Use drinking water. Do not use seawater or recycled water. WARNING May result in death or serious injury.
Page 4
Safety Precautions (Continued) WARNING CAUTION This is an electrical product. Do not install it anywhere water is likely to get on Do not use the product if the main unit is unstable. the product or anywhere with humidity high enough that water is likely to form ...
Page 5
Safety Precautions (Continued) CAUTION DANGER To reduce the risk of electrocution: 1. Do not use while bathing. If a water leak should occur, always close the shutoff valve. 2. Do not place or store the product where it can fall or be pulled into a tub or sink. When the ambient temperature is likely to drop to 32 °F (0 °C) or lower, prevent damage to the pipes and hoses due to freezing.
Safety Precautions Operational Precautions (Continued) ■ For prevention of malfunctions ■ For prevention of damage Grounding Instructions ●Wipe plastic areas such as the main unit with a <About the seat switch> soft cloth tightly wrung out with water. ●When you sit on the toilet seat, the seat switch This product should be grounded.
Page 7
Parts Names Main display Right side of the main unit Power LED Seat LED Toilet lid cushions Deodorizer outlet Energy saver Toilet lid Water LED Part no., etc. Wand CLEAN Main unit removal button (Pages 30, 31) Deodorizing fi lter <All the LEDs light up in the fi...
Page 8
Preparation Using the Product for the First Time 1. Turn on the power 2. Open the shutoff valve Insert the power plug. Fully open the shutoff valve. The wand extends and then retracts. Check that the "Power" LED lights up. ...
Basic Operation Mechanism of Auto Functions Using the Control Panel "EWATER+" is used automatically to clean the wand. "Rear "Rear soft cleansing" "Oscillating cleansing" As you approach As you sit As you stand up Cleansing cleansing" • Cleanses your rear with mild •...
Page 10
Temperature Adjustment Toilet Seat, Warm Water, Drying Three diff erent temperature levels (High, Medium, Low) and "OFF" setting can be made. Displaying the temperature level of the pressed button Toilet seat temperature button (When you want to adjust the toilet seat temperature) Warm water temperature button When the seat temperature and the warm water When the seat temperature and the warm water...
Energy Saver Features Type "Auto energy saver" or "Timer energy saver" can be selected. To save energy, lower (or turn "OFF") the seat or warm water temperature. You want to save energy only You want the product to save You want to save energy Energy saver is on for the preset duration of time.
Page 12
Energy Saver Features How to Set Auto energy saver button Auto energy saver Timer energy saver ●Set the Energy saver at the time you want to start it. Example: To save energy from 1 am to 7 am (for 6 hours) When 1:00 AM comes, Timer energy saver button Press...
Various Operations Setting List How to Set Available Settings Setting Types Settings Bold: Initial settings Ref. Page Auto wand CLEAN / OFF • Set whether or not to clean the wand automatically Page 26 Pre-mist / OFF • Set whether or not to spray mist in the bowl unit automatically Auto Cleaning functions...
Various Operations Auto functions Cleaning Features Cleaning Features Set whether or not to clean the wand Set whether or not to spray mist in the bowl Set whether or not to deodorize automatically Set whether or not to power deodorize automatically unit automatically after sitting on the toilet seat...
Maintenance Power Plug Main Unit WARNING Power Plug Main Unit (Approximately once a month) (Approximately daily) Always unplug the power plug from the outlet before maintenance or inspection. (Failure to do so may cause electric shock or malfunction, resulting in a breakdown.) Soft cloth •...
Maintenance Gap between the Main Unit and Bowl Unit Gap between the Main Unit and Bowl Unit [SW3074T40] [SW3074] Gap between the Main Unit and Bowl Unit Gap between the Main Unit and Bowl Unit (Approximately once a month) (Approximately once a month) You can remove the main unit to clean the top You can remove the main unit to clean the top of the bowl unit and the bottom of the main unit.
Maintenance Gap between the Main Unit and the Toilet Lid Deodorizing Filter Wand Gap between the Main Unit and the Toilet Lid Deodorizing Filter (Approximately once a month) (Approximately once a month) The toilet lid can be removed for Unplug the power plug. thorough cleaning.
Maintenance What to Do? Water Filter Drain Valve If the water does not fl ow due to a water service interruption Water Filter Drain Valve (Approximately once every 6 months) <If you think the water pressure has weakened> If the water does not fl ow due to a water service interruption Close the shutoff...
What to Do? Freeze Damage Prevention Long Periods of Disuse When the ambient temperature is likely to drop to 32 °F (0 °C) or lower, take measures to prevent freezing. If the toilet is in a location you will not visit for a long time, drain the water. (Failure to do so may cause breakdown or skin irritation due to polluted product tank water.) Attention! •...
First, try the actions described on pages 38 - 41. Rear cleansing, Rear soft cleansing, Front cleansing and Wand CAUTION If the problem persists, consult the installer, seller, or TOTO customer service. If a water leak occurs, close Ref. Trouble Please check (see contact information on the back cover.)
Page 21
● If the "Wand CLEAN" LED does not light up, it is time to replace the component The Wand CLEAN that generates "EWATER+". Consult the installer, seller, or TOTO customer ● Is the toilet seat temperature set to "OFF" or a low level? LED does not light up service.
Temperature fuse, anti-idling fl oat switch standards for requirements). f) Damage or loss resulting from electrical surges or lightning strikes or other acts which are not the fault of TOTO or which Backfl ow prevention device Vacuum breaker, Check valve the product is not specified to tolerate, including failure to use the factory equipped cord and plug or use of a loose or faulty Adjustable temperature range : OFF, about 82-97 °F (about 28-36 °C)
Need help?
Do you have a question about the WASHLET SW3074T40 and is the answer not in the manual?
Questions and answers