Download Print this page
Happybeds ATLANTIS BUNK BED Assembly Instructions Manual

Happybeds ATLANTIS BUNK BED Assembly Instructions Manual

Wooden bunk bed
Hide thumbs Also See for ATLANTIS BUNK BED:

Advertisement

Quick Links

ATLANTIS Wooden Bunk Bed
Important before assembly:
Read these instructions carefully before assembling or using the product.
Please check the contents of the boxes before attempting to assemble this product. The instructions will
have a checklist of parts and fittings.
It would be sensible to lay a rug or a carpet on the floor where you intend to assemble the product, to avoid
scratches and damaging the product or the floor.
Assemble the product as close to its intended final location/room as possible.
Do NOT use any power tools as this may damage the frame.
Health & Safety:
This product or some parts of this product will be heavy. Please use an assistant when lifting.
Please keep small parts out of reach of children.
Always use on a level, even surface.
DO NOT jump on the product or any of its parts.
DO NOT use this product if any parts are missing, damaged or worn.
DO NOT use this product unless all fixings are secured.
Please keep these instructions for future reference.
Assembly Instructions
Title of Product
.
.
www.happybeds.co.uk

Advertisement

loading
Need help?

Need help?

Do you have a question about the ATLANTIS BUNK BED and is the answer not in the manual?

Questions and answers

Summary of Contents for Happybeds ATLANTIS BUNK BED

  • Page 1 DO NOT jump on the product or any of its parts. DO NOT use this product if any parts are missing, damaged or worn. DO NOT use this product unless all fixings are secured. Please keep these instructions for future reference. www.happybeds.co.uk...
  • Page 2 Never drag or push the pieces across a hard or stone floor as this will cause damage to the joints. Use a carpet or a rug for extra care. If you have problems assembling or have damaged or missing pieces, please contact us by visiting: https://www.happybeds.co.uk/customer-service...
  • Page 3 IMPORTANT - READ CAREFULLY RETAIN FOR FUTURE REFERENCE NEW CARRA / ATLANTIS BUNK BED ASSEMBLY INSTRUCTIONS THE LADDER CAN BE FITTED ON THE RIGHT OR LEFT HAND SIDE...
  • Page 4 Small Mallet (not provided)
  • Page 5 ALL MEASUREMENTS ARE APPROXIMATES...
  • Page 6 PARTS 15 x 90 mm Wooden dowel 10 x 40 mm Wooden dowel 7,0 x 120 mm Screw 1/4 x 90 mm Screw 1/4" Elliptical nut Allen key Top Profile 7,0 x 50 mm Screw Bottom Profile 4,0 x 35 mm CC Screw Glue 18 mm Plastic cap Ladder...
  • Page 7 22 x Small Mallet 10x40 x22...
  • Page 8 Small Mallet 10x40 x16 7x 120 x 16...
  • Page 9 LOWER BUNK Small Mallet 15x90 10x40 x12 Lower Ladder Bunk Hole Ladder Hole Ladder Hole Ladder Hole 1/4X90...
  • Page 10 UPPER BUNK Small Mallet 10x40 x12 Upper Ladder Bunk Hole Ladder Hole Ladder Hole Ladder 7x 90 Hole 1/4X90...
  • Page 11 Attach the side slat first by pushing the side rails together so that the slats is flush against the side rail, before inserting the screws. Lower Bunk Spacer x2 Next attache the remaning slats. Place the slats onto the side rails supports and 4,0x35 x30 distribute evenly by using the spacer providede.
  • Page 12 Attache the side slat first by pushing the side rails together so that the slats is flush against the side rail, befire inserting the screws. Upper Bunk Spacer Next attache the remaning slats. Place the slats onto the side rail supports and 4,0x35 x30 distribute evenly by using the spacer provided.
  • Page 13 ASSEMBLY OF UPPER AND LOWER BUNK 4,0x25 x08...
  • Page 14 LADDER LEFT LADDER RIGHT ASSEMBLING LADDER ASSEMBLING LADDER RIGHT SIDE LEFT SIDE 7x50 D4x13 x12 Ladder on Left Side 7x50...
  • Page 15 WARNING: THE MATRESS SURFACE MUST NOT BE ABOVE THIS LINE. 7x50 7x 90...
  • Page 16 32 x D5x8 D10x15 x6 D4x13 x32 4,0x35 x09 Your New Carra / Atlantis Bed Is Now Complete And Ready To Use.
  • Page 18 floor as this will cause damage to the joints and could result in failure to the product that will invalidate the warranty. For more information on cleaning and product care visit: https://www.happybeds.co.uk/help-and-advice Notes We’ve tried to make this product as easy to assemble as possible. In the unlikely event that...

This manual is also suitable for:

New carra bunk bed