Inserting/Removing The Memory Card - Leica Q2 MONOCHROM Instruction Manual

INSERTING/REMOVING THE MEMORY CARD

The camera will save exposures to an SD (Secure Digital), SDHC
(High Capacity) or SDXC (eXtended Capacity) memory card.
Notes
• SD/SDHC/SDXC memory cards are available from various
suppliers in various sizes and with differing read/write speeds.
Memory cards with high storage capacities and high read/write
speeds offer quick storage and rendering.
• The memory card may not be supported (capacity) or will have
to be formated in the camera before first use (see p. 134). The
camera will in that case display a relevant message. Please see
the section "Technical Data" for information about supported
cards.
• Check the memory card for correct alignment if you are having
difficulties inserting it into the camera.
• See p. 10 and p. 13 for additional information.
• Video recordings require a high write speed.
▸ Ensure that the camera is switched OFF (see p. 34)
OPENING THE COVER OVER THE MEMORY CARD SLOT
▸ Slide the cover as shown in the illustration until you hear a click
• The cover lifts automatically.
CLOSING THE COVER OVER THE MEMORY CARD SLOT
▸ Close and hold down the cover
▸ Slide the cover as shown in the illustration until it audibly clicks
into place
EN
31