Table of Contents
Advertisement
Identification
Restart the Service Reminder: (The same as Pulsar RS 200)
Note: 1. To reset the Service Reminder, the vehicle and engine speed must be zero.
2.The reset can be done in any of the modes ODO / TRIP 1 / TRIP 2.1.
Nº
Press MODE (M) and turn
'ON' the ignition lock.
Hold the M button for more
1
than 10seconds.
Release the Mode button
and within 10 seconds,
2
press the SET button for
more than 5seconds.
3
4
3.Reinitiate the Clock:
• The digital clock indicates the time in the format HH and MM separated by
':' • It is a 12-hour clock
• Initially it will flash ':'
• It is only possible to set the clock in TRIP1 mode.
Pass
The service reminder
icon starts blinking.
Reminder Service
will restart (the icon
will turnoff)
The mileage of the next
maintenance will be
displayed.The text of the
Odometer / TRIP 1 / TRIP 2
will turn off for 5 sec.
After 5 seconds the text will
reappear with their respective
reading of kilometers.
Resultado
Manual de Servicio Bajaj Dominar 400
Clock
5
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Dominar 400 and is the answer not in the manual?
Questions and answers
Rear absorber assembly diagram can avaliable??please
Rear absorber assembly diagram can avaliable??
The context mentions a "Dominar 400 Spare Parts Catalogue" that includes diagrams showing systems and major components. It is likely that a rear absorber assembly diagram is available in this catalog.
This answer is automatically generated
Где находится датчик давления масла.
The oil pressure sensor on the Bajaj Dominar 400 is associated with the oil pressure motor engine oil system. The context does not specify the exact physical location of the sensor on the engine. Therefore, based on the provided information, the exact location cannot be determined.
This answer is automatically generated