(Optional) Note The PoE adapter is only included in the MeetingBar endpoint product package. We recommend that you use the accessories provided or approved by Yealink. The use of unapproved third-party accessories may result in reduced performance. CTP18 Connection Assemble your CTP18...
Page 4
(It is only applicable to VCS endpoints and MeetingEye endpoints) Video Conferencing Endpoint (except VC200) VC200 After connecting CTP18 to the endpoint, you can control the endpoint on CTP18. Method 2. Connect the CTP18 with the endpoint by Wired LAN...
Page 5
- For VCS/MeetingEye endpoints: Enter the endpoint IP address and PIN code according to the on-screen prompts in the CTP18, then the system will be automatically paired with the CTP18. Note: If the system has a YMS or other account logged in, the IP address show...
Page 6
CTP18 Installation Put on a table You can place the CTP18 on the conference room table and adjust the touch screen as you need. 28° 50° Mount on a wall 100mm If the conference room environment allows, you can also route the CTP18 through the wall.
Page 11
We are not liable for problems with Cleaning Requirements Yealink device arising from the use of this product; we are not liable for Before cleaning the device, disconnect it from the power supply.
Page 12
As one of the best providers in more than 140 countries and regions including the US, the UK and Australia, Yealink ranks No.1 in the global market share of SIP phones shipments.
Need help?
Do you have a question about the CTP18 and is the answer not in the manual?
Questions and answers