Siemens SIMATIC HMI Unified Comfort MTP700 Operating Instructions Manual page 118

Operating the Control Panel
5.10 Apps
Starting pre-installed apps from the project
However, you can also start the pre-installed apps via an operating element in the project.
To do this, use the "StartProgram" system function in your configuration.
Enter the following command under "Program name": "/opt/siemens/App_Restriction/
of start script>
Depending on the desired app, use of the following scripts for the "
App to be started
Doc Viewer
E-Mail Client
File Browser
Media Player
PDF Viewer
Web Browser
Under "Program parameters", you can specify which file is to be opened.
Example
Open the "MyPDFfile.pdf" from a USB stick connected to interface X61:
● "Program name": "/opt/siemens/App_Restriction/runOkular.sh"
● "Parameter": "/media/simatic/X61/MyPDFfile.pdf"
See also
App Management (Page 119)
118
"
Associated start script
runLibreoffice.sh
runEvolution.sh
runThunar.sh
runVLC.sh
runOkular.sh
runChromium.sh
<Name of start script>
Unified Comfort Panels
Operating Instructions, 03/2020, A5E46641217-AA
<Name
":