Savant PAV-VOMVP1F Quick Reference Manual

Savant ProAV Single Port 4K UHD Video Output IP Receiver
with Video Processing and Control (PAV-VOMVP1F/PAV-VOMVP1C)
Quick Reference Guide
Box Contents
(1) Audio/Video Over IP Receiver (PAV-VOMVP1F/PAV-V0MVP1C)
(1) SFP+ module (PAV-VOMVP1F only)
(1) Installation Kit (075-0199-xx)
(2) Mounting Brackets
(4) Screws
(1) IR Emitter (4ft long)
(1) Power Cord
(1) Power Adapter
(1) 4-pin Control Connector
(1) Quick Reference Guide (this document)
Specifications
Environmental
Temperature 32° to 104° F (0° to 40° C)
Humidity 10% to 90% Relative Humidity (non-condensing)
Dimensions and Weights
Height 1.38 in (35.0 mm)
Width 8.27 in (210.0 mm)
Depth 5.47 in (139.0 mm)
Weight Net: 3.3lb (1.5 kg) | Shipping 4.8lb (2.2 kg)
Power
Input Power 12V 3A DC
16 W (PAV-VOMVP1F)
Nominal Power
19 W (PAV-VOMVP1C)
36 W (PAV-VOMVP1F)
Maximum Power
36 W (PAV-VOMVP1C)
Audio
Supported Pass-though of all HDMI audio formats are
Formats supported.
Video
HDR Supported
640x480
720x480
4
720x576
800x600
Supported
1024x768
Formats
1280x720
1280x720
1280x1024
1920x1080
1 = at 24 Hz 3 = at 30 Hz
2 = at 25 Hz 4 = at 50 Hz
Compliance
FCC Part 15
Safety and
Emissions
RoHS Compliant
PAV-VOMVP1F/PAV-VOMVP1C | 009-1481-01 | 171201
Copyright 2017 Savant Systems, LLC
5 3
1920x1080
5 4
1920x1080
5
1920x1080
5 5
1920x1200
5 1
3840x2160
4 2
3840x2160
5 3
3840x2160
5 4
3840x2160
1 5
3840x2160
5 = at 60 Hz
CE C-Tick
Required Components
Savant Audio/Video Over IP Device (PAV-VIM8S/PAV-VIM4S)
Savant System Host
Savant qualified 10G Managed Network Switch
Savant User Interface
Savant Design and Configuration Tools
Front Panel
Item Description
Reserved for future use.
A
RSVD LED
Blue - LED on by default.
Off - No valid connection
B
Link TX LED Blue - Valid link
Blinking - Sending Ethernet Data
Off - No valid connection
C
Link RX LED Blue - Valid link
Blinking - Receiving Ethernet
Off - No video signal detected.
D
Video LED
Blue - Video signal detected.
Off - Device is off. No power applied.
E
Power LED
Red - Main board is powered
F
P1 Reserved for future use.
G
RSVD Reserved for future use.
Network Configuration
To ensure that the IP Address will not change due to a power outage,
Savant recommends using DHCP reservation within the router. By
using this method IP Addresses for all devices can be managed from a
single UI, avoiding the need to access devices individually.
NOTE: Setting DHCP reservation varies from router to router. Refer to
the documentation for the router to configure DHCP reservation.
Network Requirements
The A/V over IP Device requires a Savant qualified 10G managed
switch. This switch must be configured for the A/V over IP devices. For
more information on this see the Savant Audio/Video over IP Network
Configuration Guide on the Savant Customer Community.
1 of 2
For Product Info
A C E
B D
45 Perseverance Way, Hyannis, MA 02601
Savant.com | 508.683.2500
G
F