RF SOLUTIONS EZTEXT Manual
  1. Manuals
  2. Brands
  3. RF SOLUTIONS Manuals
  4. Remote Control
  5. EZTEXT
  6. Manual

RF SOLUTIONS EZTEXT Manual

Gsm remote control system
Hide thumbs Also See for EZTEXT:
Table of Contents

Advertisement

Quick Links

Download this manual
Features
Two way remote control via SMS Text
•
Easy to install and configure using SMS
•
text message
No PC required.
•
2 digital inputs (volt free)
•
2 x Relay Changeover Contacts rated
•
240Vac 5A
Optional external temperature
•
measurements
User can set inputs and outputs names
•
Waterproof enclosure rated IP68
•
Worldwide Quad Band GSM.
•
Applications
Remote Maintenance,
•
warnings / Alarms/ Reset.
Heating Systems
•
Irrigation Systems.
•
Remote system monitoring.
•
Plant Maintenance.
•
Security Systems
•
Alert / Panic caller
•
Description
EZTEXT is a self contained two way Remote Control System which provides two
changeover contact switches and two 'no volt' switch detect inputs. EZTEXT will send
text messages to up to five users if its input is activated or at a temperature set
point. A user can control EZTEXT switches by sending text messages. Custom mes-
sages may be set easily via configuration text messages.
GSM Remote Control System
DS-EZTEXT-6
EZTEXT
GSM
Network
EZTEXT
Inputs
outputs

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EZTEXT and is the answer not in the manual?

Questions and answers

Related Manuals for RF SOLUTIONS EZTEXT

Summary of Contents for RF SOLUTIONS EZTEXT

  • Page 1 Inputs Description EZTEXT is a self contained two way Remote Control System which provides two changeover contact switches and two ‘no volt’ switch detect inputs. EZTEXT will send text messages to up to five users if its input is activated or at a temperature set point.

  • Page 2: Ordering Information

    This can be achieved by calling the service provider. The SIM card should be inserted into EZTEXT before applying power • RF Solutions recommends O2 and Vodaphone SIM card and has carried out extensive testing using the SIM cards we have for these two networks. •...

  • Page 3: Signal Strength

    EZTEXT LED Indication at Start up Logging onto Network (traffic light sequence) Error! (All Flash ON / OFF together) Error - No GSM Service 1. Check SimCard 2. Check Antenna Connection 4. LED Indication after start up (normal operation) Signal Strength Activity LED’s...

  • Page 4: Optional External Antenna

    Operational battery backup (880mAH lithium rechargeable) The battery provides an automatic backup supply to continue normal operation when power fails. EZTEXT can also send an SMS when power is switched to battery and when main power is re- stored. The battery is recharged and maintained when power is present In the event of a complete power loss, EZTEXT will retain user configured data, however the status of the relays will be lost.
  • Page 5 1 minute, and then start again. Note : Default password is 1234 UNITPW#UID#UNITID 1234#UID#Door Alarm This sets the ‘identity’ of the EZTEXT unit, and will be Unit identity included in any response text from EZTEXT. Response: The UNITID can be 4 to 10 characters.

  • Page 6: Input Commands

    Requests the actual current value of the counter 6 more activations required before text is sent Sets a timer (Max 65500 secs). When the EZTEXT input is activated the timer starts to countdown in seconds. 1234#IPDLY1#60 When the counter reaches zero, providing the input Input 1 has a 60sec is still activated a text message will be sent.

  • Page 7: Output Commands

    UNITPW#OPDLY? OPDLY? Requests the current ‘on’ time setting for an output Responds with ; EZTEXT replies with the preset time delay output and OUTPUT1= 500/34 the actual time that the output has been activated for (output1 has been ac- tive for 34 out of a total...

  • Page 8: Temperature Commands

    System Commands Title Description Command Example UNITPW#SIGQ Report GSM 1234#SIGQ SIGQ Reports EZTEXT GSM signal strength as; signal ‘POOR’ (consider alternative antenna) strength Response: Signal is good ‘OK’, or ‘Good’. Retrieve 1234#STATUS status of STATUS UNITPW#STATUS requests the current status of all...

  • Page 9: Technical Specifications

    EZTEXT REVISION CHANGE HISTORY Date Product Change / Improvement Change Revision Add a Delay of 30 seconds to the internal power detector so the EZTEXT 24/1/19 ECN318 will require continuous main power failure for 30 seconds before trigger- ing a power failure SMS...
  • Page 10 Specifies certain limits for hazardous substances. WEEE Directive 2012/19/EU Waste electrical & electronic equipment. This product must be disposed of through a licensed WEEE collection point. RF Solutions Ltd., fulfills its WEEE obligations by membership of an approved compliance scheme.

Table of Contents