Features; Internal Parts And Wiring Diagram Lynx Distributor; Fuse Detection - Victron energy Lynx Distributor Manual

3. Features

3.1. Internal parts and wiring diagram Lynx Distributor

The internal physical parts and the wiring diagram of the Lynx Distributor indicating the following parts
• Positive busbar
• Negative busbar
• Fuses
• Positive connections
• Negative connections
• Ground connection
Positive Busbar
Negative Busbar
The Internal physical parts of the Lynx Distributor
+
F1
-
- +
The internal wiring diagram of the Lynx Distributor

3.2. Fuse detection

The Lynx Distributor monitors each fuse and will detect a blown fuse.
When a fuse blows, the red fuse LED will illuminate, the power LED will turn red and an alarm message is send to a connected
Lynx Smart BMS.
Fuse detection is possible from all fuses on the battery side or on the load or charger side. Be aware that the fuse detection has a
particularity; when batteries are connected to multiple Lynx Distributor circuits and if one of the battery fuses blows, the fuse
monitor will not measure a high enough voltage over the fuse to trigger a broken fuse alarm, until the battery is being charged or
discharged.
Page 4
Lynx Distributor
Ground connection
F2 F3
- + GND
- +
+
F4
-
- +
Fuses
Positive
connections
Negative
connections
Features