To Save Changes To A Preset - 1010music Blackbox User Manual

Blackbox User Manual 1.7
Note:
► All of the preset folders are gathered under one \Presets folder at the
root.
► Before you Pack a preset file, the .xml file lives in its own sub-folder
under \Presets which is created as soon as you create a preset, but the
WAV files stay in their source folders until you pack them.
► Blackbox will automatically move a legacy preset into the new folder
location the first time you load that preset after upgrading to the 1.5 or
newer firmware. You may then use the Pack function to consolidate all
of the files used by the preset into the preset's folder.
► All presets have a file named preset.xml under the folder that has the
name of the preset. This file contains all of the settings for this preset.
► We covered how to
► Presets are not saved automatically in the background. This ensures
that you don't make unintended changes to a preset.

To Save Changes to a Preset:

By now you may have added a few pads to your preset and spent some time configuring
them. If you want to keep the results of your efforts, you will need to save the preset.
Blackbox does not automatically save changes as you work. If you change to a different
preset or unplug blackbox, you will lose your work.
1. Press PSET to display the Preset Management screen.
2. Touch File to display the Preset File Menu.
3. Touch Save to store your changes to the currently loaded
preset.
Page 78 of 106
Create a New Preset earlier.
Copyright 1010music LLC 2021
Preset File Menu