Sealey VSE3157 Manual

Thank you for purchasing a sealey product. manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
Wear eye
instructions
protection
1. safeTy
WarninG! Ensure Health and Safety, local authority and general
‰
workshop practice regulations are adhered to when using tools.
Do noT use tools if seals or threads are damaged. Any defective
8
seal musT be changed before use to avoid incorrect readings.
Maintain tools in good and clean condition for best and safest
9
performance.
ensure that a vehicle which has been jacked up is adequately
9
supported with axle stands.
Wear approved eye protection. A full range of personal safety
9
equipment is available from your Sealey dealer.
Wear suitable clothing to avoid snagging. Do noT wear jewellery
9
and tie back long hair.
ensure any disconnected fuel pipes are plugged to avoid spillage.
9
ensure that the correct connector is used for the engine being
9
tested.
Compression tests on diesel engines should be conducted when
9
the engine is cold.
Keep a fire extinguisher to hand.
9
Use proper ventilation and avoid breathing in exhaust fumes.
9
ensure you keep tester at arms length when relieving pressure to
9
avoid personal injury.
Fuel delivery must be prevented by either operating the engine
9
stop lever or disconnecting fuel pump solenoid.
Protect hands from burns, as quick release coupling and
9
adaptors may become very hot during use.
always release the pressure from the gauge before disconnecting
9
the quick release coupling.
Account for all tools and parts being used, Do noT leave them in
9
or near the engine. Return all parts to the case and store this in a
safe, dry, childproof location.
imporTanT: Always refer to the vehicle manufacturer's service
instructions, or a proprietary manual, to establish the current
procedure and data. These instructions are provided as a guide only.
2. inTroDuCTion
diesel engine glow plug compression test adaptor kits that cover a wide range of modern vehicles. For use in conjunction with Sealey diesel
Compression Gauge, Hose & TdC Base Kit (Model no. VSe3157). See Sealey website for complete vehicle applications.
3. speCifiCaTion
Model no: ............................................................... VSe3157
nett Weight: ................................................................1.82Kg
Associated Tools: .................. VSe3151, VSe3152, VSe3153
© Jack Sealey limited
Diesel Compression GauGe, Hose & TDC
Base KiT
Model no:
Wear protective
gloves
Original Language Version
Vse3157
fig.1
Pressure Release Valve
VSe3157 Issue 2 18/02/19