Troubleshooting - Smoothskin BARE Manual

5.4 TROUBLESHOOTING

The Activation Button Lights
on the handset do not light up
when placed against your skin.
The Activation Button on the
handset lights up white when
placed on the skin, but the
handset fails to flash when the
Activation button is pressed.
The Activation Button Lights
on the handset are illuminated
red continuously, and the
device will not function.
The SMOOTHSKIN handset,
treatment window, power
supply or cable are damaged,
broken, cracked or appear
defective.
30
PROBLEM SOLUTION
Make sure the power supply
is plugged in. Ensure the
Skin Tone Sensor is fully
pressed against the skin.
Your skin could be too dark for
treatment. Check against the
skin tone chart in the front of
this user guide.
There could be a fault with the
device. Unplug the device and
restart. If the problem persists,
contact the SMOOTHSKIN
Helpline.
This indicates that there is
a fault with the device. Stop
using the device and contact
the SMOOTHSKIN Helpline.
DO NOT USE.
If you are in any doubt about
the safety of SMOOTHSKIN
BARE or suspect it is damaged
in any way, it must not be used,
and you should contact the
SMOOTHSKIN Helpline.