Advertisement
Quick Links
866498 (RC-DCF)
USER MANUAL
1.
Features
1.1
Time
Radio Controlled Time (RC-DCF)
12/24 hour time display selectable
Daily Snooze Alarm function
Perpetual Calendar Up to Year 2069
Day of week in 8 languages user selectable
1.2 Temperature
Indoor measurable range: 0°C ~+ 50°C[+32 to +122°F]
Measures °C / °F user selectable
Outdoor measurable range: -20 ~ 50°C [-4 ~ +122°F]
1.3 Wireless Outdoor Sensor
433 MHz RF receiving frequency
Transmission range: 100 meters (open area)
Low-battery indicator for outdoor thermos senor
Wall Mount or Table Stand
Advertisement
Related Manuals for BALANCE TIME 866498
Summary of Contents for BALANCE TIME 866498
- Page 1 866498 (RC-DCF) USER MANUAL Features Time Radio Controlled Time (RC-DCF) 12/24 hour time display selectable Daily Snooze Alarm function Perpetual Calendar Up to Year 2069 Day of week in 8 languages user selectable 1.2 Temperature ...
- Page 2 2. Unit Appearance Part A: A1: Radio Controlled Icon A4: Date, Day of Week A2: Time Display A5: Outdoor Temperature A3: Indoor Temperature Part B: B1: “MODE” Button B5:”- C/F/ ” Button B2: “SNOOZE” Button B6: “SEARCH” Button B3: “ALARM” Button B7: “RESET”...
- Page 3 3. Outdoor Sensor Appearance. D1: Transmission Indication LED D5: “RESET” button D2: Outdoor Temperature D6: °C/°F” button D3: Battery Compartment D7: Stand D4: Wall Mount Hole 4. Getting Started: 4.1 Main Unit: Open main unit battery compartment cover [C2] Insert 4 x AA size batteries observing polarity [ “+”...
- Page 4 The remote sensor should be securely mounted onto a horizontal surface. Note: Transmissions between receiver and transmitter can reach up to 100m in open area. Open Area: there are no interfering obstacles such as buildings, trees, vehicles, high voltage lines, etc. 6.
- Page 5 are well received or stopped manually. 7.2 Manual Time Setting: In time display mode, hold “MODE” button (B1) for 3 seconds to enter Clock/Calendar setting Mode. Press “+” (B4) or “-” (B5) button to adjust the setting and press “MODE” ...
- Page 6 Press “ALARM” button (B3) to activate or deactivate the alarm. If the alarm is on, alarm icon " " appears on the display. When alarm alerts, press any buttons to stop the alarm. Otherwise, the alarm signal sounds for about 2 minutes, then stops automatically. Press “SNOOZE”...
- Page 7 Use a pin to press the reset button (B7) if the Unit does not work properly. All Setting Modes will automatically exit in 15 seconds without any adjustment. The clock loses its time information when the battery is removed. ...
-
Page 8: Declaration Of Conformity
DECLARATION OF CONFORMITY: Herewith we declare, that this wireless transmission device does comply with the essentials requirements of R&TTE Directive 1999/5/EC. A copy of the signed and dated Declaration of Conformity is available on request via mail@combimex.nl. www.combimex.nl...
Need help?
Do you have a question about the 866498 and is the answer not in the manual?
Questions and answers