YULU Swirl & Style Tie Dye Studio Instruction Manual

13 14
a
Screw pink water caps to each Twist base of handle onto
end tighten using purple base using location lugs as
handle. shown.
Modes can be changed during dying to ensure all areas can be accessed.
Use purple handle to rotate orb in either position.
16 17
Hold the blue handle and give it Once fully tie dyed remove
a little mix! handle from base. If there is
any excess dye in the orb this
can now be removed into a sink.
Make sure to use purple handle
as key to unlock the caps.
20 21
Wash through over sink until
water runs clear.
Swirl & Style™ Tie Dye Studio is a trademark of YULU®. © 2020 YULU International Ltd.
All Rights Reserved. Trademarks and Patents pending.
Manufactured by: YULU International Ltd. | Room 2104, 21/F, K. Wah Centre, 191 Java Road, North Point, Hong Kong.
www.yulutoys.com | support@yulutoys.com
Product style and colors may vary from package. Please retain package for future reference and retain instructions as it
contains important safety information. Please remove all packaging material before giving to children. An adult should
periodically check this toy to ensure no damage or hazards exist, if so, remove from use. Children should be supervised
during play.
This product should be used by children above six years only. Please ensure you cover and protect surfaces and clothing.
CONFORMS TO ASTM D-4236.
14 15
b
Push centre of handle
Push nozzle into self-sealing
down onto base as shown.
valves and gently squeeze in dye.
Ensure you do not squeeze the
bottle until the nozzle in fully
* For best results do not over
squeeze the bottles and over
soak the fabric. We recommened
1/2 a bottle of each colour.
18 19
Reseal the orb & leave in Orb
Remove top and bottom cap over
for 6-8 hours for best results.
sink. Use purple handle as key
Alternatively take out
carefully and place in clear
plastic bag to use Orb again.
22
Unscrew the yellow caps Leave item to dry. Cold hand wash only. We
and carefully remove item recommend washing dyed fabrics at least
from Orb and remove 3 times before washing with your other
elastic bands. laundry, as the dye colour may bleed out a
little during your first few washes.
inside the orb.
for untightening.
US TG YL060060 IM 01
CONTENTS:
• Technique Booklet
• Design Studio Mixing
Ball with Handle • X10 Elastic Bands
• Clear Gloves
• X6 Dye Bottles
• X12 Dye Powders • Bottle Stickers
• Instructions
(Approx. 1g each)
Adult supervision required