Advanced Settings For Auxiliary Load - SunSynk Hybrid Parity Installer Manual

4.20. Advanced Settings for Auxiliary Load

To configure auxiliary load (previously known as smart load) settings click on the "Aux Load" icon.
A nice feature is when the batteries are fully charged and the inverter is still producing energy from the
PV or the turbine it is possible to direct the energy to another load such as a water heater.
Aux Load off Battery % or Voltage Battery level when the Aux load switches off
Aux Load on Battery % or
Voltage
Solar Power
Gen Input
Aux Load Output
For Micro inverter Input
Zero Export
Gen Peak Shaving
Website: www.sunsynk.com
What this page displays:

What you can do from this page:




Battery level when the Aux load switches on.
Power limiter to the maximum power allowed to the Aux load.
Tick this box if using a Generator.
Tick this box if using an Aux or Smart Load.
Tick this box if intending to connect a supplementary inverter
or micro inverter (Max. 4kW).
Tick this box to stop exporting power produced by the Aux
Load.
Tick this box to use peak power shaving.
E-mail: sales@globaltech-china.com
Use of the Gen (Aux) input or output.
Set up a generator input.
Set up an auxiliary (smart) load.
Set up peak power shaving.
Use an additional inverter or micro
inverter.
46