To Do A Check Of The Electronics; To Do A Function Test - Husqvarna DM 200 Workshop Manual

3. Put the test probes at the connection points as the
illustrations show.

7.5 To do a check of the electronics

1. Do a visual check for damaged components.
2. Do a soft start of the motor. Refer to the operator's
manual. The product must operate correctly.

7.6 To do a function test

• Let the motor operate for 10-15 minutes and
measure the no load current.
230V: Typical measured value is I = 3.0 - 3.5 A.
34 - Function test 1332 - 001 - 04.03.2021