Tips / Spare Parts; 11.1 Tips; 11.2 Spare Parts - MAD DA2002 Instruction Manual

11.

Tips / Spare Parts

11.1 Tips

- While assembling the Lathe, ensure that the spacing between the brake caliper
ears and Lathe is even both above and below.
- Rotate or change the bits frequently to ensure a fresh, sharp cutting edge.
- Prior to machining, verify that the bits will be able to machine the entire surface of
the brake disc.
- A special brochure detailing various options for your lathe is available through
your supplier.

11.2 Spare parts

- Replacement parts can be ordered through your supplier. When ordering parts,
refer to the parts list included with the lathe. Please provide the lathe serial num-
ber when ordering.
- Store this instruction manual and parts list in the storage box of the Lathe.
MAD Disc Aligner
Tips / Spare Parts
DA2002 31
20-02-2015 TH2250040
en