Do you have a question about the BRMIC1 and is the answer not in the manual?
Questions and answers
Candice Cowling
January 20, 2025
Good day
My keypad is unresponsive is there a reset code we can use to reboot it ?
1 comments:
Mr. Anderson
February 4, 2025
To reset the keypad of the Bennett Read BRMIC1 microwave if it is unresponsive, hold the "Reset" button for about 3 seconds.
This answer is automatically generated
Munyaradzi Matienga
February 17, 2025
Not heating up
1 comments:
Mr. Anderson
February 17, 2025
The Bennett Read BRMIC1 may not be heating up due to several possible reasons:
1. Power Supply Issues – Ensure the microwave is properly plugged in and the power outlet is functioning. Avoid using an extension cord. 2. Door Not Fully Closed – The microwave will not operate if the door is not securely shut. 3. Incorrect Settings – Check if the correct power level and cooking time are set. Ensure the microwave is not in "Defrost" mode instead of "Cook" mode. 4. Faulty Components – A defective magnetron, diode, or capacitor could prevent heating. 5. Overload Protection Activated – If the unit was used for an extended period, it might need time to reset. Unplug it for a few minutes and try again. 6. Damaged or Burnt Fuse – A blown internal fuse can stop the microwave from functioning.
If the issue persists, refer to the user manual or contact a qualified technician.
This answer is automatically generated
Herschel
February 26, 2025
Fuse rating for BRMIC2
Christo van Eeden
April 19, 2025
Microwave oven heats very slowly even at 100% power, what can be the problem?
Summary of Contents for Bennett Read BRMIC1
Page 1
28L MICROWAVE FAMILY-SIZED CAPACITY WITH DIGITAL, ONE-TOUCH EASE USER GUIDE DOUBLE-UP YOUR GUARANTEE! SCAN* TO REGISTER YOUR EXTRA 1 YEAR GUARANTEE * HOW? IT’S SIMPLE REALLY… • SWITCH ON YOUR MOBILE CAMERA, POINT IT AT THE QR CODE ON THE LEFT & TAP THE LINK THAT POPS UP •...
BENNETT READ 28L MICROWAVE. EXTENDED GUARANTEE Your BENNETT READ 28L MICROWAVE comes with a 1 (one) year guarantee. If you register your guarantee online within 14 (fourteen) days of purchase, we will extend the guarantee to 2 (two) years. To activate your extended guarantee, scan the QR code on the cover of this user guide, then tap on the link and complete the online form.
Page 4
is damaged, it must be replaced by the manufacturer or a qualified person in order to avoid an electrical hazard • Do not operate the appliance if the door or door seals are damaged. If the door or door seals are damaged, it must be repaired/ replaced by the manufacturer or a qualified person in order to avoid any hazards.
Page 5
• Always use oven gloves when removing cooked food, cookware or accessories from the appliance • This appliance is intended for heating food and beverages. Drying of food or clothing; heating of warming pads, slippers, sponges, damp cloth and similar may lead to risk of injury, ignition or fire.
Page 6
gives protection against exposure to microwave energy. • The manufacturer does not accept responsibility for any damage or injury caused by improper or incorrect use, or for repairs carried out by unauthorised personnel • In case of technical problems, switch off the machine and do not attempt to repair it yourself.
28L MICROWAVE OVERVIEW 1. Door Lock 2. Viewing Window 3. Rotating Axis 4. Rotating Ring 5. Glass Turntable (Diameter: 315mm) 6. Digital LED Display 7. Control Panel Waveguide Cover The waveguide cover is situated inside the microwave cavity, next to the wall of the control panel.
DIGITAL LED DISPLAY CONTROL PANEL Popcorn Baked Potato Pizza Beverage Frozen Dinner Reheat Cook By Defrost By Speed Weight Weight Defrost Cook Timer Clock Reset Power Start / Stop...
BEFORE FIRST USE Before using this unit, please read these instructions completely. Save this manual and pass it on to next user. Remove all packaging materials, labels and/or stickers from your appliance and dispose correctly. Check the package to verify that all contents are included and undamaged.
Page 10
3. RESET Clears all previous settings. When the cooking time has been paused, press this button to return to “standby” mode. 4. COOK This button is used to set the current clock. In “standby” mode, press the "Clock" button once to enter the clock setting state. Press 0-9 buttons to set the clock, and then press the "Clock"...
POWER LEVEL MICROWAVE APPLICATION High power - Applicable for quick and thorough cooking P90 - P100 Medium-High power - Applicable for medium express P70 - P80 cooking Medium power - Applicable for steaming food P50 - P60 Medium-Low power - Applicable for defrosting food P30 - P40 P10 - P20 Low power - Applicable for keeping warm...
Page 12
B. MULTI-STAGE COOKING To obtain best cooking result, some recipes call for different cooking modes/power and times. The Bennett Read Microwave is capable of programming 2 cooking stages at once. You may enter your personalized settings as follows: EXAMPLE: You want to cook food with 100P microwave for 3 minutes then 20P for 9 minutes.
1) In “standby” mode or clock state, Press “Speed Defrost” button. 2) Enter desired defrosting time by pressing correct number buttons. 3) Press Start/Stop button to start it. 9. DEFROST BY WEIGHT Input the weight of the food into the microwave and the microwave will automatically set the defrosting time (see diagram on page 10).
Page 14
EXAMPLE: To cook 1.2kg beef: STEPS DISPLAY After power-up, the colon flashes, then press “Reset” button once or wait for 30sec Press “Cook By Weight” button once Select the food kind by entering code“1” Set food weight by pressing number”1” “2” “0” Press “Start/Stop”...
HELPFUL TIPS: 1) The “Preset Cooking Button” feature is designed to cook with food which is between temperatures of20-25 °C. If the food is at a different temperature, the cooking effect will vary. Please adjust it accordingly. 2) The shape, weight and temperature of the food will affect the cooking outcome. When using the “Preset Cooking”...
COOKING TIPS The following factors may affect cooking results: FOOD ARRANGEMENT Place thicker food pieces towards outside of the dish, the thinner parts towards the centre and spread them evenly. Do not overlap food pieces if possible. COOKING TIME Start cooking with a short time setting, evaluate it after the cooking time has completed and extend it accordingly (if needed).
CARE & CLEANING CLEANING • Unplug the unit from the electrical outlet when not in use and before cleaning • Always wait for the unit to cool down completely before cleaning • Always clean surfaces which come into contact with food, food splashes or grease. CAUTION: Built-up grease may overheat and begin to cause smoke or catch fire.
Page 18
If both the wall socket and the fuse are functioning properly, contact your nearest Tevo service center. GUARANTEE Your BENNETT READ 28L MICROWAVE is guaranteed against manufacture faults for a period of 1 (one) year. If you register your guarantee online at www.tevo.co.za within 14 (fourteen) days of purchase, then your guarantee will be extended to 2 (two) years.
Contact your local municipality for information on safe disposal in your area. PLEASE RECYCLE SPECIFICATIONS: Model: BRMIC1 Capacity: 28L Voltage: 230V~, 50Hz Microwave Input Power: 1400W Microwave Input Power: 900W...
Page 20
28L MICROWAVE FAMILY-SIZED CAPACITY WITH DIGITAL, ONE-TOUCH EASE Brought to you by: 0861 77 88 88 www.tevo.co.za | info@tevo.co.za...
Need help?
Do you have a question about the BRMIC1 and is the answer not in the manual?
Questions and answers
Good day My keypad is unresponsive is there a reset code we can use to reboot it ?
To reset the keypad of the Bennett Read BRMIC1 microwave if it is unresponsive, hold the "Reset" button for about 3 seconds.
This answer is automatically generated
Not heating up
The Bennett Read BRMIC1 may not be heating up due to several possible reasons:
1. Power Supply Issues – Ensure the microwave is properly plugged in and the power outlet is functioning. Avoid using an extension cord.
2. Door Not Fully Closed – The microwave will not operate if the door is not securely shut.
3. Incorrect Settings – Check if the correct power level and cooking time are set. Ensure the microwave is not in "Defrost" mode instead of "Cook" mode.
4. Faulty Components – A defective magnetron, diode, or capacitor could prevent heating.
5. Overload Protection Activated – If the unit was used for an extended period, it might need time to reset. Unplug it for a few minutes and try again.
6. Damaged or Burnt Fuse – A blown internal fuse can stop the microwave from functioning.
If the issue persists, refer to the user manual or contact a qualified technician.
This answer is automatically generated
Fuse rating for BRMIC2
Microwave oven heats very slowly even at 100% power, what can be the problem?