Page 2
Original Instructions: English All rights reserved throughout the world. No part of this document may be stored in a retrieval system, transmitted, copied or reproduced in any way, including, but not limited to, photocopy, photograph, magnetic or other record without the prior agreement and permission in writing of the Vitec Group plc Disclaimer The information contained in this manual is believed to be correct at the time of printing.
V-Mount or Gold-Mount batteries simultaneously while invalidate the system EMC liability. powering your camera accessories with the lightweight and portable Anton/Bauer VM2, GM2 battery charger. CAUTION! Do not exceed the current output limit of Lithium-ion batteries, like the Anton/Bauer GO 90 (98Wh the product when powering auxiliary devices.
Page 5
Do not use solvents or scouring agents. Examples of the operating temperature limits. Refer to the product approved solvents are Cidex® and Windex®. Consult Anton/Bauer technical specifications for the operating limits for the Customer Support Group for approved list of cleaning agents.
Page 6
Ion battery transport. Since the interpretation and application of regulations may vary with the aviation company, the transport of the Anton/Bauer battery may be disallowed even when the conditions described above are satisfied. Anton/Bauer therefore strongly recommends that you consult with your...
Intelligent charging with power to spare. Charge two Gold Mount or V-Mount batteries simultaneously while powering your camera accessories with the lightweight and portable Anton/Bauer GM2 / VM2 battery charger. Lithium-ion batteries, like the Anton/Bauer GO 90 (98Wh 8A) charge in approximately 3.5 hours.
Components and Connections Carry Handle Battery Release Latch Power Switch LED Battery Charging Status Battery AC Input Battery V-Mount (x2) 100 / 240 VAC, Gold Mount (x2) 50 / 60 Hz Power Indicator Intergrate Stand XLR4 16.7VDC / 4.5A 2 X Legs (battery) power output...
Operation Features • The XLR4 output converts AC to DC power when charging or can be used to deliver battery power to devices that only have an XLR input. • Use the XLR4 output at the same time as charging. •...
5.5 in (14 cm) Width 2.25 in (5.7 cm) 2.25 in (5.7 cm) Weight 2.2 lbs. (1 kg) 2.2 lbs. (1 kg) Mount Type / Bays GM2 / Mount Type Gold Mount V Mount Battery Bays Electrical Data: Output Connector 4-Pin XLR Female...
After Sales Support At Vitec Production Solutions we take great pride in the quality of our products and we also recognize that your experience with our products will be even more positive and productive with strong, effective support to back them up. Vitec Production Solutions Service Centers are there to provide technical support for customers and partners, via telephone or email.
This equipment has been approved by one or more agencies. All changes and/or modifications not expressly approved by Anton/Bauer could void the users’ warranty and authority to operate this equipment. There are no serviceable parts...
Shelton, Connecticut 06484. If you (the purchaser of the Product from responsible for all shipping and handling charges to and from authorized Anton/Bauer, or the person for whom the Product was purchased, if it facility. was a gift) have any questions regarding Product applications, Product...
Page 14
Use of unauthorized equipment in conjunction with Anton/Bauer products constitutes misuse under our warranties and may limit or void those warranties. Anton/Bauer does not authorize, condone, recommend, or otherwise assume any liability or responsibility resulting from the use of any battery,...
Need help?
Do you have a question about the GM2 and is the answer not in the manual?
Questions and answers