Settings Window - ChamSys QuickQ Manual

Chapter 10. Settings Window
To access the QuickQ Settings Window, tap the  button on the top right of the display and
press the Settings option.
In the main Settings Window, you will find settings to change the console's default behavior.
• Group and Cue faders LEDs mimic fixture colours. With this option on, the LEDs above the
Multi-Function Faders on the left of the console will emulate the current colours of the
fixtures.
• Newly created playbacks are chases, not cue stacks. With this option on, recording more
than one cue to any unused playback of the 10 playbacks will make a chase.
Playbacks can be converted after recording. Double tap the playback window above a
playback fader. Then, select the change required from the button.
QuickQ consoles can be run in 2 different modes, live mode and theatre mode.
• Live mode will default all newly created playbacks to chases.
• Theatre mode will default all newly created playbacks to cue stacks, enabling the user to
step through the cues one at a time.
Theatre mode also enables automatic "move when dark" and playback crossfades, converting
playback 2 to a dedicated manual crossfade fader. Moving this fader will manually fade cues
one after the other in the time taken to move the fader.
"Move When Dark" works on a per playback basis, when enabled any heads that are used in
the next Cue but which have 0% intensity in the current Cue are checked to see whether the
44 QuickQ v6 2021-03-12