Acer IDM2 Installation Manual page 21

Cascading Hot-swap Cage Configuration
Power connector
CN8
CN3: Connect to 2nd
hot-swap cage HDD
Fault LED connector
SCSI Connector
cable
Power connector
CN3: Connect to
system board's HDD
Fault LED connector
The SCSI connector cable and the three-
connector HDD fault LED cable is an optional item
needed for installing two hot-swap cages.
Consult your dealer for the availability of this
cable.
System Board Connector Cable
Connect this side to
the 1st hot-swap
12
CN1: To system board
connector cable
1st hot-swap cage
CN1
2nd hot-swap cage
SCSI Terminator
Red Strip
Connect this side to
the system board
Installation Guide