ZENEC Z-E3756 Update Instructions

Mainsystem

Z-E3756 Update Instructions MainSystem

Requirements

The update consists of a complete MainSystem software update, which must be run from USB data carrier. You will need:

> USB removable storage device (USB stick) with at least 2 GB storage capacity.

> A PC or notebook with Windows operating system.

Please note: Before you start, the USB stick must be formatted with FAT 32. (Right-click on USB memory device in Windows

Explorer. Select "Format" > FAT 32 > Start.

(!) The ZENEC Z-E3756 restarts several times during the software update and stays off, among other things, for a few

seconds (black screen for approx. 10 ~ 15 sec.) before the device restarts. Please do not operate or switch off the device

during the update process.

The MainSystem software can be found at: www.zenec.com> Support> Software Updates> FIAT> Z-E3756

Link:

http://www.zenec.com/support/software-updates/z-e3756/?lang=en

1. Download the Software Update "v1.7.7 "Z-E37567_FEU_v1.7.7.exe".

2. The software package is a self-unzipping executable. Start extraction with a double-click and select your USB stick as target

for the uncompressed ﬁ les.

3. You obtain two ﬁ les called „ swupdate_6529B_20190305 and ZENBOOTL2180817.con" in the root directory of the USB stick

4. Connect the USB stick to the Z-E3756 USB connection cable.

5. Go to the device menu:

Settings > System > Software Update and conﬁ rm by tapping on the green hook checkbox.

Tap on the green hook checkbox again, in the "Software Update?" pop-up window.

1 of 3

March 2019 / RevA

Table of Contents

Do you have a question about the Z-E3756 and is the answer not in the manual?

Page 1 Explorer. Select "Format" > FAT 32 > Start. (!) The ZENEC Z-E3756 restarts several times during the software update and stays off, among other things, for a few seconds (black screen for approx. 10 ~ 15 sec.) before the device restarts. Please do not operate or switch off the device during the update process.
Page 2 Z-E3756 Update Instructions MainSystem 6. The update process starts automatically now. 7. The update installs sequentially and the lower part of the display screen informs about the progress. The software installation takes about 4~5 minutes. Note: After successful installation, device shows TMC licenses pop-up window below.
Page 3 If the version differs from the target version, install the update a new. Additional information TMC: In order for the TMC function to become active on the Z-E3756 device, the navigation software needs to be updated as well. Navigation software 9.35.2.129824 Oct 13 2018 (or newer version) Instructions and a tutorial video for the navigation update can be found at: www.zenec.com>...