System Boot Drive
This parameter allows you to specify the system search sequence.
The selections are:
Drive A then C:
a diskette in the drive, the system boots from drive A.
Otherwise, it boots from drive C.
Drive C then A:
a hard disk (drive C) installed, the system boots from drive C.
Otherwise, it boots from drive A.
C:
The system always boots from drive C.
A:
The system always boots from drive A.
Boot from IDE CD-ROM
When set to
Enabled
IDE CD-ROM drive. If a CD is present, the system boots from the
CD-ROM; otherwise, it boots from the drive specified in the System
Boot Drive parameter. When set to
from the drive specified in the System Boot Drive parameter.
Note that the CD-ROM drive mentioned above
refers to an IDE CD-ROM drive.
3-20
The system checks drive A first. If there is
The system checks drive C first. If there is
, the system checks for a bootable CD in the
Disabled
, the system boots
Altos 9100B System Guide