Table of Contents
Advertisement
Storage Service - FTP Client Settings
This is used to set FTP client settings.
Storage Service - FTP Service Setup
User Name: The username to connect to the remote FTP server with.
Password: The password to connect to the remote FTP server with.
Download URL: The URL to the file on the remote FTP server
that you wish to download.
Port: The port to connect to the remote FTP server on.
Device: The device to download the file specified in the download URL to.
Save Path: The location on the device to download the file specified in
the download URL to.
Click Apply to apply the settings and click Refresh to refresh the page.
Storage Service - TFTP Service Setup
This is used to enable or disable the TFTP server service.
Storage Service - FTP Service Setup
Enable TFTP Service: Whether to enable or disable the TFTP service.
Tick this to enable the TFTP service.
TFTP Directory: The directory that the TFTP service uses.
Click Apply to apply the settings and click Refresh to refresh the page.
Advertisement
Table of Contents
Need help?
Do you have a question about the DWR-956M and is the answer not in the manual?
Questions and answers
How do I check or monitor devices connect to router?
Only the red light is on
How can I change the password
To change the Wi-Fi password on a D-Link DWR-956M router, follow these steps:
1. Access the router's settings.
2. Navigate to Step 5 in the setup process.
3. Modify the Wi-Fi SSID (network name) and Pre-shared Key (Wi-Fi password) as needed.
4. Save the changes.
If additional steps are required, refer to the router's configuration interface.
This answer is automatically generated