USB Operation ��������������������������������������������������������������������������������������������������������������� 9 Playing JPEG/Picture CD & MP3 Discs ����������������������������������������������������������������������� 10 System Set-Up ������������������������������������������������������������������������������������������������������������� 12 Troubleshooting ���������������������������������������������������������������������������������������������������������� 18 Spec & Warranty ���������������������������������������������������������������������������������������������������������� 19 Safety Information ������������������������������������������������������������������������������������������������������� 20 YEAR Register your product online for a FREE 3 year WARRANTY extended warranty at: www.majority.co.uk...
CONTROLS & FUNCTIONS On/Off Previous Chapter/Track Return: Return to VCD menu Volume Up Switch to DVD or USB mode Volume Down Setup Repeat: Press repeatedly in DVD Navigate up mode to scroll through: Repeat Navigate left a title, chapter, track or go to the Navigate down beginning.
Page 6
CONTROLS & FUNCTIONS FRONT & BACK VIEW DVD Tray Power On/Off Remote Sensor (Y.Pb/Cb.Pr/Cr) Output Display Power Cable Outlet USB Port HDMI Output Open/Close 2 x Audio Output ports Play/Pause Video Output Stop...
GETTING STARTED Setting Up Connect the power plug of the DVD player to a wall outlet. The power indicator and clock on the front panel will illuminate. Follow the guidance below for connecting your DVD player: Cable Connection Options 1a. Connect a RCA cable between the 2 channel Audio Output port and the RCA input on your TV.
DVD OPERATION The following DVD formats can be played: DVD, DVD-R-RW, CD Video, Mpeg4. Ensure that your TV is set to the correct mode for DVD playback. Plug in the DVD player and press the ‘Power’ button to turn the unit on. You can do this on the unit (Ref.41) or via the remote (Ref.1).
USB OPERATION This device has a USB port in the front interface for MP3/Movie playback. Insert a USB device into the USB port (Ref.37). Press the DVD/USB button on the remote control (Ref.3) to switch the source to USB. The DVD player will read and display the file list from the USB drive. buttons (Ref.5, Ref.6, Ref.7, Browse through the file list by pressing the Ref.25) on the remote control.
PLAYING JPEG/PICTURE CD & MP3 DISCS PLAYING JPEG/PICTURE CDS The following formats can be played: Jpg, Jpeg, CD Photo Press the STOP button and 12 small pictures will show on the TV screen. Press the buttons to select the desired picture to view. (Ref.5), (Ref.6), (Ref.7), (Ref.25).
Page 11
PLAYING JPEG/PICTURE CD & MP3 DISCS PLAYING MP3 DISCS The following formats can be played: Mp3, WMA, CD Audio, CD-R-RW, CD Whilst a MP3 disc is playing, a menu screen will display on the TV. Press the buttons (Ref.5, Ref.7) to scroll through tracks or folders. Press the ENTER button to select the track or folder.
SYSTEM SET-UP MENU OPERATION Press the SET-UP button (Ref.4) on the remote control and the SET-UP menu will display. The menu options are General, Audio, Dolby, Video and Preference. Follow the instructions below for each of the set up options: •...
Page 13
SYSTEM SET-UP MENU 1: GENERAL SET-UP Press the buttons on the remote control to open the ‘General’ menu (Ref.5, Ref.6, Ref.7, Ref.25). Use the buttons on the remote control to scroll between the sub-menus: TV Display (Aspect Ratio) Different values will be displayed here depending on your TV set. In most cases you will be able to select from 4:3/PS (Pan and Scan), 4:3/LB (Letterbox), and 16:9 (best for widescreen TV sets).
Page 14
SYSTEM SET-UP MENU 2: AUDIO SETUP Press the buttons on the remote control to open the ‘Audio’ menu (Ref.5, Ref.6, Ref.7, Ref.25). Two different submenus will appear on the menu. Press the buttons on the remote control to browse between the stereo output settings: LT/RT The audio output is in the Left and Right channels format.
Page 15
SYSTEM SET-UP MENU 3: DOLBY DIGITAL SET-UP Press the buttons on the remote control to open the ‘Dolby’ menu (Ref.5, Ref.6, Ref.7, Ref.25). Two different submenus will appear. Press the buttons on the remote control to browse between the sub-menus: Dual Mono Stereo: stereo output L-Mono: mono-left channel...
Page 16
SYSTEM SET-UP MENU 4: VIDEO SET-UP Press the buttons on the remote control to open the ‘Video’ menu (Ref.5, Ref.6, Ref.7, Ref.25). Three different submenus will appear on the menu. Press the buttons on the remote control to browse between the sub-menus: Component Adjust the video output when connecting to video terminals.
Page 17
SYSTEM SET-UP MENU 5: PREFERENCE SET-UP To access the Preference section, the player must be in one of the following states: 1) with the disc tray open; or 2) with the disc tray closed but with no disc inside. Press the buttons on the remote control to open the ‘Preference’...
Remote Control does not work Use the Remote Control closer to the DVD player. Check the battery level of the batteries. SUPPORT If you require further assistance with your new DVD player, please contact our support team on the Majority website: www.majority.co.uk/support...
WARRANTY All products come with a standard 12 month warranty. All items must be registered www.majority.co.uk for the warranty to be valid. Once on the web page, use the menu to find “register your product”. You will also be given the chance to extend your...
ADDITIONAL WARNINGS 2. Keep these instructions. Instructions are also availa- The apparatus shall not be exposed to dripping or splash- ble for download at www.majority.co.uk ing and no objects filled with liquid, such as vases, shall 3. Heed all Warnings be places on the apparatus.
Need help?
Do you have a question about the SCHOLARS SCH-DVD-BLK and is the answer not in the manual?
Questions and answers
how to connect my Majority SHD-DVD-BLK to an computer