Table of Contents
Advertisement
UNIPOWER
10
PQ ONLINE
PQ Online is mainly used for configuring the measuring devices UP-2210R, UP-2210 and Unilyzer
900/900C, but is also used as a communication program between the measure site and the office. In
that case, PQ Online is used for the manual polling of measure data or for real-time analysis.
Connect
10.1
When you have started the program and pressed "Connect" a connect to meter dialogue will
automatically appear. Here you select the communication method chosen for connecting the
computer with the meter.
You can contact a meter in three different ways:
Figure 53
UP-2210R/P Hardware installation and configuration manual
Figure 54
Serial (USB)
Here you specify the COM port the meter is connected
to.
Ethernet
Here you must specify the meters IP address that the
unit has been configured with. It is possible to select
different ports in order to route different meters on
one IP address. The default port is 16421.
59
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the UP-2210 and is the answer not in the manual?
Questions and answers