Koso Mini 3 Instructions

● Thank you for purchasing mini 3 the meter
thoroughly and retain it for the future reference.
Notice
1.The meter works for DC12V only!
2.For installation, please follow the steps described in manual. Any damage caused by wrong installation shall be imputed to the users.
3.Don't break or modify the wire terminal. To avoid the short circuit, please don't pull the wire when installing.
4.Do not disassemble or change any parts excluding the manual description.
5.The interior examination or maintenance should be executed by our professionals.
MARK MEANING:
You could get the installation details from the information behind the mark.
Some processes must be followed to avoid the affection caused by wrong installation.
WARNING! Some processes must be followed to avoid damages to yourself or the public.
CAUTION! Some processes must be followed to avoid the damage to the vehicle.
1-1
Accessory
1
Meter X 1
5
Velcro X 1 set
Please contact the local distributor if the items you open are not the same, with the above-listed one.
1-2
Option accessory
1
Oil temp sensor
adapter
M12 X P1.5 X 15L
M14 X P1.25 X 15L
M14 X P1.5 X 15L
M16 X P1.5 X 15L
M18 X P1.5 X 15L
M20 X P1.0 X 15L
M20 X P1.5 X 15L
Some of the option accessories may not sell. For the details, please contact the local distributor.
2
Wiring installation instructions
Meter (Accessory 1)
INsTRUCTION
temperature+Time+Temperature) , before operating the unit, please read the instruction
(Air
2
Temp sensor wire set X 1
2 Water temp
sensor adapter
M14
M16.M18
M22.M26 mm
WARNING!
Temperature sensor is
Wrapped in the tube. Please do not cut
the tube to prevent the failure of the sensor.
3
Temp sensor X 1
3
Cylinder head temp
sensor
M10.
M14 mm
Red / Postive pole (Connect
to the battery DC 12V)
Temp sensor wire set (Accessory 2)
Black / Ground wire connect to
the vehicle body or the engine
(It must be a good ground)
Press the Press the
button one time button 3
seconds
4
Mid-way connect X 3
4
Temp sensor
M10 X P1.0
M12 X P1.5
M14 X P1.25
M14 X P1.5
M16 X P1.5 / M18 X P1.5
Brown /
"+"Wire
connect key on DC 12V
main power switch
Temp sensor (Accessory 3)
wh003ba58a