Resetting - Siemens SENTRON PAC3120 Manual

Parameter assignment
7.2 Parameterizing via the operator interface
7.2.8.3

Resetting

Selection
CLEAR MIN/MAX VALUES
RESET COUNTERS
UNIV. COUNTER RESET
FACTORY DEFAULTS
COMMUNICATION
PARAMETERS
EXECUTE
Note
The reset must be confirmed by selecting the "Execute" field. Otherwise the device reset is
not executed.
86
Range
Resets all minimum and maximum values to the
instantaneous value.
Yes: active
•
No: not active
•
Resets the following counters to zero (0):
Energy counters
•
Active energy
•
Reactive energy
•
Apparent energy
•
Operating hours counter
•
Yes: active
•
No: not active
•
Resets the configurable universal counter to zero
(0).
Yes: active
•
No: not active
•
All device settings and measured values except
the communication parameters and energy sec-
ondary values are reset to the as-delivered condi-
tion.
Yes: active
•
No: not active
•
All communication settings are reset to the as-
delivered condition.
Yes: active
•
No: not active
•
Confirmation of the reset
Factory setting
–
PAC3120 and PAC3220
Equipment Manual, 10/2019, L1V30425208F-01
No
No
No
No
No