Bushnell SHIELD Series Instructions page 3

&
SETUP TAKE DOWN
BEFORE YOU BEGIN:
• Before camping, unpack tent and ensure all parts are accounted for.
• Select a level site clear of rocks, branches, and other hard or sharp
objects to setup your tent.
• Always secure the tent using all stakes and tie-downs provided to
prevent property damage or personal injury.
• Keep tent clear of power lines!
• Do not set up your tent under trees because of potential lighting strikes
or falling tree limbs in inclement weather.
TENT CONTENTS:
• Poles (3)
• Tent
• Metal Stakes (12)
• Rainfly
?
WANT
See page 6 and 7 for frequently asked questions
and parts diagram. Visit www.bushnelltents.com
MORE
for additional camping tips and information!
1
PREPARE FOR SETUP
1 Remove all contents from bag.
Lay tent fabric out flat.
2
4
• Gear Loft • Carry Bag
• Floor Mat
2
INSERT POLES
Connect the sections of each of the (3) poles.
1
² Insert the two large poles into sleeves. Poles
will create an "X" across the tent.
Model No. 30190
3
ATTACH POLES
1 Insert the silver pins into the ends of
the poles at each corner of the tent.
2 Secure tent fabric to poles using
black clips.
5
PREPARE RAINFLY
Using the remaining small pole, set
1
both pole ends into webbing pockets in
the middle of the silver side of rainfly.
² Tie the pole to the rainfly with the ties
located at the center of the rainfly.
7
ATTACH RAINFLY & FLOOR MAT
¹ Attach (4) rainfly buckles and hook-and-
loop tabs to secure the rainfly to the tent.
² Attach Floor Mat to loops at front of tent,
below door with (2) black hooks on the mat.
Customer Service HELPLINE 1-888-774-5840
4
LINK POLES
Link poles together at the top of the
tent where they intersect with black
hook.
6
PLACE RAINFLY
Flip the rainfly right-side-up.
1
Drape the rainfly over tent, placing
2
the "B" logo above the door.
8
SECURE TENT
1 Secure the tent by staking down the (4)
corners with included stakes.
2 Stake out the (4) orange corner tie-
downs, and the (2) side vents.
www.bushnelltents.com