Emporio Armani AR2434 Manual

Emporio Armani AR2434 Manual

Hide thumbs Also See for AR2434:

Advertisement

ENGLISH
NOTE: Various models of the Emporio Armani Orologi collection have
screw-down crowns. If you attempt to pull the crown out for time or
Date Setting and it does not pull out easily, you may need to unscrew
your crown before pulling the crown out. This is done by turning
the crown counter-clockwise until it is completely unscrewed. Your
crown will now pull out easily for time adjustment. To return crown to
position 1, push in gently and turn clockwise simultaneously.

AUTOMATIC WINDING MOVEMENT

A timepiece fitted with an automatic winding movement obtains
the power to wind itself by the movement of your wrist. When
fully wound, your timepiece has a power-reserve of approximately
38 hours. If the timepiece has not been worn for over 38 hours it
is advised that it be manually wound to ensure necessary power-
reserve. To manually wind, keep the crown in position 1 and then turn
it clockwise, 10 to 20 times.
Important Notes: As with every mechanical timepiece, the automatic
day/date calendar is automatically adjusted by a complicated
mechanism that is triggered between 10pm and 2am. It is important
to avoid any adjustment of the day/date calendar setting operation
and any backward movement of the watch hands during this period
of time.
To ensure longevity and accuracy, it is recommended to have your
mechanical timepiece over-hauled by a qualified technician every
3 – 5 years.
22

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AR2434 and is the answer not in the manual?

Questions and answers

Summary of Contents for Emporio Armani AR2434

  • Page 1 ENGLISH NOTE: Various models of the Emporio Armani Orologi collection have screw-down crowns. If you attempt to pull the crown out for time or date setting and it does not pull out easily, you may need to unscrew your crown before pulling the crown out. This is done by turning the crown counter-clockwise until it is completely unscrewed.
  • Page 2 2 HANDS AND 3 HANDS MINUTE HOUR SECONDS Time Setting 1. Pull crown out to position 2. 2. Turn crown clockwise to rotate hour and minute hands to desired time. 3. Push crown back to position 1. DATE MODELS CLOSED Rotate to set hour &...
  • Page 3 Time Setting 1. Pull crown out to position 3. 2. Turn crown counter-clockwise until day changes to the present day. Continue to turn crown to set correct am/pm time. 3. Return crown to position 1. Do not change the date between the hours of 10pm and 2am. This is the time when the movement is in position to carry out the automatic date change, and any interference may cause damage to the movement.
  • Page 4 POWER RESERVE/DATE CLOSED POWER RESERVE SECONDS DATE Time Setting 1. Pull crown out to position 2. 2. Turn crown clockwise to rotate hour and minute hands to desired time. 3. Push crown back to position 1. Date Setting With any pointed (but not sharp) tool, push hidden pusher A to adjust the date.
  • Page 5 CHRONOGRAPH 2 EYE CENTER STOP-SECOND SECOND HAND 1 2 3 MINUTE COUNTER Setting the time 1. Pull crown out to position 3 (the watch stops). 2. Turn crown until you reach the correct time. 3. Push crown back to position 1. Setting the date 1.
  • Page 6 Chronograph: Basic function (Start / Stop / Reset) 1. Press pusher A to start the center stop-second hand. 2. To stop the timing, press pusher A again. 3. To reset the two chronograph hands to zero positioning, press pusher B. Chronograph: Intermediate or interval timing 1.
  • Page 7 CHRONOGRAPH 2 EYE CHRONOGRAPH SECOND HAND CHRONOGRAPH MINUTE HAND MINUTE HAND 1 2 3 HOUR HAND DATE SECOND HAND Time Setting 1. Pull crown out to position 3. 2. Turn crown to set the desired time. 3. Return crown to position 1. Date Setting 1.
  • Page 8 CHRONOGRAPH STOPWATCH 24-HOUR HAND MINUTE HAND 1 2 3 SECOND HAND Time and Date Setting 1. Before setting the time, make sure the chronograph is stopped and set to zero (12:00) position. 2. Pull crown out to position 2. 3. Turn crown clockwise until the previous day’s date is displayed. 4.
  • Page 9 CHRONOGRAPH Time Setting SECOND CHRONOGRAPH HAND SECOND HAND 1. Pull crown out to position 3 (the watch stops). CHRONOGRAPH MINUTE HAND 1 2 3 2. Turn crown to set the desired time. CHRONOGRAPH 3. Return crown to HOUR HAND position 1. NOTE: In order to set CHRONOGRAPH MINUTE HAND...
  • Page 10 5. Reset: press B (the three chronograph hands are returned to their zero positions). NOTE: The accumulation of the timing can be continued by pressing A (Restart / Stop, Restart / Stop, …). Chronograph: Intermediate or interval timing 1. Start: press A (start timing). 2.
  • Page 11 CHRONOGRAPH DUAL-TIME MINUTE HAND CENTER STOP-SECOND SECOND HAND HOUR HAND CROWN 1 2 3 MINUTE COUNTER SECOND TIME ZONE DATE Time and Date Setting 1. Pull crown out to position 2 and turn clockwise to set date to the previous day. 2.
  • Page 12 Chronograph Functions Before using the chronograph, please ensure that: • The crown is in position 1. • The two chronograph hands are precisely at zero (12:00) position after pressing B. Should this not be the case, the positions of the hands must be adjusted. Please refer to the section titled “Adjusting the Chronograph Hands to Zero Position.”...
  • Page 13 DUAL TIME ZONE DATE 1 2 3 DUAL TIME ZONE HAND Time/Calendar Setting 1. Pull crown out to position 2. 2. Turn crown clockwise to set to previous day’s date. 3. Pull crown out to position 3. 4. Turn crown clockwise until date changes to today’s date; set correct a.m.
  • Page 14 ADJUSTING THE STRAP 1. Open the buckle and pull the strap (in the direction of the arrow shown) until the adjustment pin appears. 2. When the position is correct for your wrist, place the adjustment pin in the desired hole. 3.
  • Page 15 PIN LINK DIAGRAM PIN PUSHER CHAIN NOSE PLIERS BRACELET HOLDER ARROWS Link Removal To remove a link from a pin link bracelet, you will need the bracelet holder, pin pusher, and chain nose pliers (see pin link diagram). 1. Open the clasp on the bracelet. 2.
  • Page 16 WATER WATER-RELATED USE RESISTANCE Caseback Depth Marking Washing Showering, Swimming, Scuba Hands Bathing Snorkeling Diving — — — 3 Bar, 3 ATM 30 Meters 5 Bar, 5 ATM 50 Meters 10 Bar, 10 ATM 100 Meters 20 Bar, 20 ATM Meters 30 Bar, 30 ATM...
  • Page 17 WATCH CARE AND PRECAUTIONS This watch contains precision electronic components. To ensure the best wear, please follow these simple guidelines for watch care: 1. Avoid leaving your watch in any extremes for long periods of time: direct sunlight, extremely warm, or extremely cold location. •...

Table of Contents

Save PDF