Table of Contents
Advertisement
This battery isolation switch
can be found on the wall side
edge / rear of the carriage cover.
Important - The switch should
remain ON at all times. Failing
to do so will result in the
batteries losing their charge.
Please be aware this will not
be covered under the warranty
terms and conditions.
the carriage cover.
must be inserted and turned
10
9000_AC_TC_Combined_Multilingual 130 user manual_1220_WEB.pdf 9
9000_AC_TC_Combined_Multilingual 130 user manual_1220_WEB.pdf 9
STAIRLIFT OPERATION
BATTERY ISOLATION SWITCH
KEY SWITCH
Acorn Stairlifts User Manual
2/10/2021 10:44:57 AM
2/10/2021 10:44:57 AM
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Superglide 130 and is the answer not in the manual?
Questions and answers
Hi I just put new batteries in my lift. I removed the seat. Everything is fine except the seat swiveled latch doesn't work. Help please. Free spin in bot directions. The lift is working
The Acorn Superglide 130 manual does not provide specific instructions for fixing a seat swivel latch that spins freely in both directions. However, based on general stairlift operation, you can try the following steps:
1. Ensure the seat swivel lever is properly engaged when attempting to lock the seat in place.
2. Check if the swivel mechanism is obstructed or misaligned.
3. Inspect for any loose or damaged components in the swivel latch mechanism.
4. If the issue persists, contact an authorized Acorn dealer for assistance.
If the seat does not lock securely, it may affect stairlift operation and safety.
This answer is automatically generated
Lift is not working. Not giving any codes. Batteries show charged.
If the Acorn Superglide 130 lift is not working and not displaying any codes, despite the batteries showing charged, the issue could be that the Battery Isolation Switch is turned off. The manual states that in power-down or sleep mode, no display is shown, and the lift may not be receiving power. Check that the Battery Isolation Switch is turned on.
This answer is automatically generated