Troubleshooting - Pelgrim MAC614RVS Instructions For Use Manual

TROUBLESHOOTING

General
Try the solutions below if you have problems with your appliance. You
could save yourself the time and effort of an unnecessary phone call to
customer services.
Food remains uncooked
• Check that the cooking time has been set correctly and the 'start
key' has been pressed.
• Close the door properly.
• Check whether a fuse has blown and whether a circuit breaker has
been activated.
Food is overcooked or undercooked
• Check that the correct cooking time has been set.
• Check that the correct power has been set.
The sensors don't respond; the display is locked.
• Disconnect the appliance from the power supply for a few minutes
(unscrew the fuse or switch off the mains), then reconnect the
appliance and switch it on.
Sparking in the oven space.
• Ensure that all cover panels of the lamps are secure and that all
spacers are placed on the guide rails.
Electronic interference can cause the display to reset.
• Disconnect the plug from the socket and put it back in again.
• Set the time again.
Condensation appears inside the oven.
• This is normal. Wipe the appliance clean after use.
The fan continues to operate after the oven has been switched off.
• This is normal. The fan will keep working for a while after the oven
is switched off.
Air flow is detected around the door and outer casing.
• This is normal.
EN 35