Related Manuals for Aranet Aranet4
Summary of Contents for Aranet Aranet4
- Page 1 Aranet4 USER MANUAL Monitors air quality at your home, school, office or any other indoor private or public spaces. ARANET — MAKING SENSORS WIRELESS...
- Page 2 IR lamp Detector By using the Aranet4 app on your smart device it is possible to wirelessly access real-time data and up to one week of historical measurement data. The app also allows you to configure the Aranet4 device. The Aranet4 app supports connection of several Aranet4 sensors to monitor their parameters remotely from a single smart device.
- Page 3 NEW Aranet4 User Manual The Aranet4 sensor screen explained Temperature of the air Relative humidity CO ² concentration Alarm status. The in Celsius or of the air (RH %). level in ppm (parts speaker symbol is visible Fahrenheit. Refer to per million).
- Page 4 (32° F to 122° F). CO ² calibration The Aranet4 device is calibrated at the factory. However, the user can perform CO ² calibration manually when needed. During the manual calibration the Aranet4 device must be exposed to fresh air (about 420 ppm of CO ² ) and the environment should be stable (not changing).
- Page 5 While batteries remain inserted, adjust the switch position (up or down) using the pin tool that is supplied with the Aranet4 device (or any other suitable thin tool). Switches can be adjusted while batteries are...
- Page 6 To connect your Aranet4 device to your smart device, make sure Bluetooth connectivity is enabled on your smart device and on your Aranet4 device, and do the following steps: Launch the Aranet4 app and on the main page (My devices) add a new device by clicking on the (+) symbol.
- Page 7 To connect the Aranet4 PRO to the Aranet PRO base station, initiate the sensor pairing mode on the Aranet PRO base station and start the pairing on the Aranet4 device by changing the switch position from disable (0) to enable (radio symbol). Alternatively, while switch is in the enable position (radio symbol on screen is visible), remove and reinsert the batteries.
Need help?
Do you have a question about the Aranet4 and is the answer not in the manual?
Questions and answers