Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for VeriFone Topaz XL
Summary of Contents for VeriFone Topaz XL
- Page 1 Topaz XL Hardware Installation Guide P/N: DOC050-001-01-A Revision: A01...
- Page 3 The content of this document is subject to change without notice. The information contained herein does not represent a commitment on the part of VeriFone. All features and specifications are subject to change without notice. VeriFone, Ruby SuperSystem, and Secure PumpPAY are registered trademarks of VeriFone, Inc.
- Page 4 Topaz XL Hardware Installation Guide Revison History Revision Date Description May 02, 2014 Initial documentation release. May 19, 2014 Added French translations for warnings.
- Page 5 Do not apply liquid or aerosol cleaners directly on the unit. Use only damp cloth for cleaning. ■ Do not use any attachments not specifically recommended by VeriFone as they can result in the risk of fire, electric shock, or injury.
- Page 6 Ne pas mettre de produit nettoyant liquide ou en aérosol directement sur l'appareil. Nettoyer l'appareil uniquement à l'aide d'un chiffon humide. ■ Ne pas utiliser d'accessoires non expressément recommandés par VeriFone en raison du risque d'incendie, de décharge électrique ou de blessure. ■...
- Page 7 Battery Charging Notification The unit should be powered up for at least 24 hours prior to initial application download. This is to prevent loss of data and to ensure that the battery pack is fully charged. L'appareil doit être chargé pendant au moins 24 heures avant le téléchargement initial de l'application.
-
Page 9: Table Of Contents
Topaz XL ........14... - Page 10 Topaz XL Hardware Installation Instructions May 19, 2014...
-
Page 11: Introduction
Controller or Sapphire Mini-server as a controller for optimum speed and efficiency, a thermal receipt printer to track sales. An on-screen receipt allows easy viewing of current transactions. In the absence of an intranet infrastructure, the Topaz XL requires an Ethernet router to connect to the ™... -
Page 12: Requirements
Printer Power Cable ■ Null Modem Adapter ■ Recommended Equipment Uninterruptible Power Supply (UPS) — VeriFone recommends that the Topaz XL be ■ connected to a UPS with a rating of 200VA or greater. Customer Display Pole ■ Cash Drawer ■... -
Page 13: Unpacking
■ Note: The cash drawer, customer display pole, thermal printer, and PINpad, which complete the Topaz XL workstation, are ordered and shipped separately. For EPSPAK/Commander Site Controller applications, the PINpad must be TCP/IP compatible. Remove any protective plastic wrapping from the components and place the components on a table or countertop. - Page 14 Topaz XL Hardware Installation Guide May 19, 2014...
-
Page 15: Installation
LAN. The printers, customer display, and cash drawers use RS-232 cables to connect to the Topaz XL, and an additional Ethernet cable to connect the router to a corporate WAN/ Intranet. See the diagram labeled “One or Two Topaz XL Workstations.”... - Page 16 Topaz XL Hardware Installation Guide May 19, 2014...
- Page 17 Topaz XL Hardware Installation Guide May 19, 2014...
-
Page 18: Choosing A Location
Humidity: 15% to 95% relative humidity at 40° C (non-condensing) ■ Avoid locations with the following characteristics: Warning:To reduce the risk of fire, do not place the Topaz XL near objects that produce excessive heat. Avertissement: Pour réduire le risque d'incendie, placer le Topaz XL loin des objets produisant une chaleur excessive. -
Page 19: Diagnostic Panel
Topaz XL Hardware Installation Guide Diagnostic Panel The Diagnostic Panel is located on the right side of the Topaz XL and can be accessed by loosening the screw that holds the cover in place. From left to right, this panel contains the following: Soft Reset Button: Reboots the Topaz XL workstation without shutting down the power. -
Page 20: Topaz Xl Rear Panel
COM Ports DC Power Video (in) Cash Drawers (2) Ethernet Microphone (in) Printer Power The rear panel of the Topaz XL workstation has the following ports: 8 Serial Ports ■ – COM1 - not assigned – COM2 - not assigned –... -
Page 21: Installing The Topaz Xl Workstation
3. Plug the printer power cable into the printer with the flat side facing up. Note: The connector slides down to lock or unlock the cable. 4. Connect the other end of the printer power cable to the Printer Power port on the Topaz XL. The connector locks into place. - Page 22 10. Plug the AC Power Cord into the other end of the power brick. Plug the power brick into an electrical outlet. Note: To prevent loss of data and to ensure that the battery pack is fully charged, the Topaz XL should be powered up for at least 24 hours prior to initial application download.
-
Page 23: Service And Parts
Service and Parts Service Do not attempt to repair, service, or adjust the Topaz XL workstation. If you have questions related to installation or troubleshooting, the VeriFone Technical Support Center is available for assistance 24 hours a day, seven (7) days a week, at 800-777-3536. -
Page 24: Parts List
Topaz XL Hardware Installation Guide Parts List VFI P/N Description M050-02-410-NAA Topaz XL 22916-01 Topaz Cable Cover P050-01-100 Topaz Customer Display P050-01-200 Topaz Media Drawer (Cash Drawer) CPS124130-3A-R Topaz Power Supply CBL268-008-01-A Topaz XL Power Cord P040-02-020 Thermal Receipt Printer... -
Page 25: Certifications And Environmentals
Topaz XL Hardware Installation Guide Certifications and Environmentals Safety UL, cUL FCC Class A (USA) and CISPR22 Class A (Europe) IEC 61000-4-2 Temperature Operating: 32 to 104° F (0 to 40° C) Non-operating: -4 to 158° F (-40 to 70° C) Humidity Operating 15% to 95% relative humidity at 40°...
Need help?
Do you have a question about the Topaz XL and is the answer not in the manual?
Questions and answers