Nokia FastMile 4G Receiver Installation Guide
Issue: 01
•
If the outside Ethernet cabling will be longer than 20 meters (64 feet), you will
need a PoE+ capable surge protector for lightning protection, subject to local
regulations, as indicated in section
•
Appropriate fastening means are needed for securing the Nokia FastMile 4G
Receiver to an outside wall or to a pole, such as strapping
•
Silicone or other waterproof sealing or caulking compound
•
Mechanical tools are required (but are not included) for mounting the Nokia
FastMile 4G Receiver, including:
•
TORX T8 screwdriver to open the SIM slot
•
The Nokia Wireless app must be installed on an Android mobile phone through
Google Play and the mobile phone must have a Bluetooth adapter, camera,
hardware compass, rotation vector (either a gyroscope or an enhanced
geomagnetic sensor that supports rotation vector), and Android OS 6.0
(Marshmallow) or above; see the Nokia FastMile 4G Receiver Customer Release
Notes for information about accessing the Nokia Wireless app and installing it
•
The LTE base station that will be used by the Nokia FastMile 4G Receiver must
be available and functioning
•
The residential gateway that will be connecting to the Nokia FastMile 4G Receiver
must be available and reachable; if the residential gateway cannot supply PoE
power to the Nokia FastMile 4G Receiver, then a Nokia-approved PoE injector
must be used in conjunction with the residential gateway.
•
The following classes of PoE injectors are available from Nokia for use with the
FastMile 4G Receiver:
•
Class I: can comply with EN 60950-1 if grounding is provided on the wall socket;
should be put as close as possible to the place where the Ethernet cable enters the
home; see section
available from Nokia.
•
Class II: can comply with EN 60950-1 if no grounding is provided on the wall socket;
can also be used if grounding is provided on the wall socket; see section
information about the Class II PoE injectors that are available from Nokia
3TG-00387-ABBA-TCZZA
Reviewing roles and installation prerequisites
8.2.1
6.2
for information about the Class I PoE injectors that are
6.2
for
39