Taking A Measurement - Samsung ARM BPM User Manual

MEASUREMENT
Take the measurement in a silent room.
The patient must relax as much as possible and do not move and talk during the
measurement procedure.
The cuff should maintain at the same level as the right atrium of the heart.
Please sit comfortably. Do not cross your legs and keep your feet flat on the ground.
Keep your back against the backrest of the chair.
For a meaningful comparison, try to measure under similar conditions. For example,
take daily measurements at approximately the same time, on the same arm, or as
directed by a physician.

Taking a Measurement

1.
After setting the User, press the
"START/STOP" button again, and
then the monitor will complete the
measurement automatically.
Ready for measurement
SYS DIA HR
12
START/STOP BUTTON
Inflating and measuring.
SYS DIA HR
After the measurement was finished, the Systolic pressure, Diastolic
pressure and heart rate will show up alternately
SYS DIA HR
SYS DIA HR
3. If the data is successfully
transmitted, the LCD will
display and then the
SYS DIA HR
device will turn off.
If the data transmission fails, the monitor will turn off automatically.
MEASUREMENT
SYS DIA HR
2.
This device will proceed to data
transmission automatically after
measurement.
SYS DIA HR
13