Radar Service Tool; Installation; System Requirements; Installing And Starting The Radar Service Tool - TERMA SCANTER 1002 User Manual

5

Radar Service Tool

The radar system can be managed through the Radar Service Tool (RST), which
is a software application used for controlling the radar system, such as parameters
and BITE information, and for monitoring radar video, plots and tracks.
The RST runs on a laptop or on a PC connected to the radar LAN.
The RST provides the user with a consistent look and feel across the various fea-
tures implemented. It supports different perspectives, where each perspective cor-
responds to a particular arrangement and subset of RST windows (views). The
user may define, store and recall individual perspectives.
For detailed descriptions of the Radar Service Tool functions, see doc. no. 357641-
HO: "SCANTER Radar Service Tool - Operator's Manual".
5.1

Installation

5.1.1

System requirements

The system requirements for the computer running the RST are found in doc. no.
357641-HI: "SCANTER Radar Service Tool".
5.1.2

Installing and starting the Radar Service Tool

To install the RST, use the 7-Zip application to extract the zip file from the CD
(357641-NF) to the computer. The startup file rst.exe is located in the directory:
"RST-357641-NF-<revision>-<Win/Linux>-<32/64bit>\rst".
Start the Radar Service Tool by double-clicking the "rst.exe" file. The user may cre-
ate a shortcut to this file and place it on the desktop.
5.2

RST features

5.2.1

Authentication

The available access administration is:
• Access to the computer is protected by a normal Windows login.
5.2.2

Access levels

To operate or to change parameters in the radar it is necessary to connect to the
radar using one of the three access levels available:
• Operational access level.
• Service access level.
• Debug access level.
SCANTER 1002 Radar System
User's Manual
1255194-HO
Page 27/62
Rev. A
2017-12-04