LOOP MULTi Fly Reel Manual

Congratulations on the purchase of your new flyreel. We wish you many seasons of good use of
your new reel in flyfishing. Enclosed are instructions for proper care and maintenance. Good luck!
Conversion left / right hand retrieve:
1. Remove spoolcap (26).
2. Pull spool (24) straight out.
3. Release stopscrews (2) ½ turn with enclosed Allen wrench.
4. Pull drag knob (1) straight out.
5. Remove drag knob nut (3).
6. Pull draw bar (23) straight out, together with cup springs (22).
7. Pull bearing holder (21) straight from shaft (14).
8. Remove seal ring (15).
9. Remove bearing (16), bearing washers (17), carbon plates (20) and one way bearing (19).
10. Turn one way bearing (20).
11. Wipe clean.
12. Assemble the reverse way.
Maintenance of the reel:
This reel is contructed so that maintenance is kept to a minimum. However, be sure to check on the
level of grease on the O-ring (25) inside the spool cap (26), after using the reel for some time. We
recommend Molykote 111C grease or similar.
11
9
5
4
3
1
8
7
2 6
LOOP MULTi Fly Reel Manual
12
16
15
14
13
17
10
CAUTION! Do not touch any moving parts of the reel when a fish is running!
Adjust the effect of the brake:
The drag knob nut (A) allows you to adjust
the brake, in order to obtain the lowest brake
effect of preference. We recommend free
spool in both directions.
1. Turn the drag knob nut (A) until the lowest
preferred brake effect has been obtained.
2. Fasten the drag nob to the ajdustment
screw and turn the handle counter clockwise
so that the heel on the inside of the drag nob
(B) will settle to the left of the stop pin (C).
Tighten the screws on the lock with the Allen
wrench.
22
21
20
19
1 Drag knob
2 Locking screw M3x5
3 Drag knob nut
4 O-ring
5 Nut washer
6 Click bush
7 Click pin
18
8 Click spring
9 Main shaft screw
10 Housing
11 Foot
12 Foot screw
13 O-ring
14 Main shaft
15 Seal ring
16 Ball bearing
A
B
C
30
24
23
17 Steel plate
18 Ball bearing
19 One way clutch ass'y
20 Carbon Plate
21 Bearing Holder
22 Cup spring
23 Draw bar
24 Spool
25 Spool cap o-ring
26 Spool cap
27 Handle knob washer
28 Handle knob
29 Handle rivet
30 balance
31 balance o-ring
31
26
25
29
28
27