Updating Firmware - Litepanels Apollo User Manual

Updating Firmware

Before proceeding with a firmware update insure that the Apollo is
powered by a reliable source and all physical connectors are firmly
attached. Performing a firmware update with the device powered by a
battery source is not recommended.
Select advanced settings at the bottom of the Web Portal.
1.
2. Select System on the left side menu.
3. Select Backup/Flash Firmware .
4. Select Flash Image .
5. Choose Browse .
6. Select the latest firmware zip files downloaded from:
www.lighticians.com/firmware
7. Select Upload .
or
www.litepanels.com/support/
apollo/firmware
8. Once the upload is complete you will be asked if you would like to
Flash Image? Select Continue to proceed.
9. While updating the below prompt will appear. You will be
disconnected from the network while the Apollo Bridge
automatically performs a normal reboot.
10. Once the LED indicators finish breathing and become solid,
you will be able to reconnect to the Apollo wireless network and
operate the device.
11. Settings are preserved through firmware updates so it is likely
that your WiFi connected devices will automatically reconnect.
Occasionally mobile devices will switch to a different WiFi network.
Check your device/computer WiFi settings to confirm that you
again are connected to your Apollo Bridge before proceeding with
normal operation or making additional configuration adjustments.
Operation
11