Advanced" Tab; Boot Configuration - Siemens SIMATIC IPC427E Operating Instructions Manual

Configure firmware

2.4 "Advanced" tab

2.4 "Advanced" tab
2.4.1

"Boot Configuration"

Basic display and input options during the boot procedure
Calling "Boot Configuration"
Select: "Setup Utility (Page 9)" > "Advanced" > "Boot Configuration".
Firmware setting
Numlock
POST Errors
12
Value Setting in
delivery
state
IPC427E
IPC477E
Off
On
Never halt on errors
Halt on all errors
All without keyboard
All without kb/ smart
Meaning
Numerical keypad is switched off after starting the de-
vice.
x Numerical keypad is switched on off after starting the
device.
Boot procedure is continued when errors occur.
Boot procedure is interrupted when errors occur.
x Boot procedure is interrupted when errors occur, except
keyboard errors.
The boot procedure is canceled when errors occur, ex-
cept for keyboard errors and S.M.A.R.T. errors (self-
monitoring, analysis and reporting technology) which
can occur with the storage media.
Firmware/BIOS Description SIMATIC IPC427E, IPC477E
Operating Instructions, 07/2020, A5E50262994-AA