Advertisement
Available languages
Available languages
3. Charge the battery cartridge with room temperature
at 10 °C - 40 °C (50 °F - 104 °F). Let a hot battery
cartridge cool down before charging it.
4. Charge the battery cartridge if you do not use it for a
long period (more than six months).
Cautions to the user
The changes or modifications not expressly approved
by the party responsible for compliance could void the
user's authority to operate the equipment.
RF exposure statements
IMPORTANT NOTE: To comply with the FCC RF
exposure compliance requirements, the antenna(s)
used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons
and must not be co-located or operating in conjunction
with any other antenna or transmitter. No change to
the antenna or the device is permitted. Any change to
the antenna or the device could result in the device
exceeding the RF exposure requirements and void
user's authority to operate the device.
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
For Canada:
Cautions to the user
The changes or modifications not expressly approved
by the party responsible for compliance could void the
user's authority to operate the equipment.
RF exposure statements
To comply with the IC RF exposure compliance
requirements, the antenna(s) used for this transmitter
must be installed to provide a separation distance of at
least 20 cm from all persons and must not be collocated
or operating in conjunction with any other antenna or
transmitter. No change to the antenna or the device
is permitted. Any change to the antenna or the device
could result in the device exceeding the RF exposure
requirements and void user's authority to operate the
device.
This device complies with Industry Canada licence
exempt RSS standard(s).Operation is subject to the
following two conditions: (1) this device may not cause
interference, and (2) this device must accept any
interference, including interference that may cause
undesired operation of the device.
Explanation of general view (Fig.1)
1. Battery compartment locker
2. Mobile (Cell phone) placing panel
3. Bluetooth pairing button
4. Volume down button
5. Volume up button
6. Next folder button
7. Next track button/Fast-forward button
8. Volume max. or min. indicator/ Low battery indicator
9. Bluetooth indicator/Aux in indicator/USB indicator
10. Previous track button/ Rewind button
11. Previous folder button
12. Power button
13. Source button
14. Play/Pause button
15. Speaker
16. Handle
17. DC in socket
18. Auxiliary input socket
19. USB charging socket
20. Mobile storage cabinet cover
21. Cable hole
22. Mobile (Cell phone) storage cabinet
23. 14.4 V/18V battery terminal
24. 10.8 V-12Vmax battery terminal
25. USB playback socket
26. Battery cover
27. Battery cartridge
28. Button
4 ENGLISH
Advertisement
