Advertisement
en_us | 42 | 3448
1 General Information
Product Name:
Product Type:
Product Number:
Weight:
Max. load capacity:
Static Test Coefficient: 3.0
Intended Use:
The lifting tackle serves for lifting of engine and
gearbox units in connection with the workshop
crane VAS 6100.
Terms of Use:
Only for qualified workshop personnel.
Only use the load holding device for work approved
by the Volkswagen Group.
Use only for loads up to as defined in the "load
cases" table.
The lifting tackle 3448 may only be used in
connection with a suitable workshop crane (e.g. VAS
6100) and only with accessories approved by the
Volkswagen Group.
Do not hold or lift any persons or animals.
Do not hold or lift articles other than those
described in the workshop manuals of the
Volkswagen Group brands.
Do not stand under suspended loads.
Use only on level, horizontal and weight-bearing
ground.
Use only in connection with the approved
accessories (see workshop manuals of the
Volkswagen Group brands).
Do not work on suspended loads.
2018-06-18
Lifting tackle
Load holding device
3448
24.3 kg
500 kg (see the "Load cases"
table)
Figure 1:
Lifting tackle 3448
1
Base support
2
Interior hexagon screw M8 x 16 - 8.8, galvanized
3
Support with load hook transverse
4
Support with load hook longitudinal
5
Shackles
Load cases
Application:
Maximum Load Capacity:
Base support
500 kg
Support with load
150 kg/piece
hook transverse
(position 3)
Support with load
268 kg/piece
hook longitudinal
(position 4)
Bosch Automotive Service Solutions GmbH
Am Dörrenhof 1
85131 Pollenfeld-Preith
Germany
Advertisement
Chapters
