Removing Lower Spray Arm - KitchenAid KMTM704E Series Technical Education

COMPONENT ACCESS
To remove the lower spray arm:
1. Lower spray arm nut location, (see Figure 1).
2. Rotate the lower spray arm nut ¼ turn counter clockwise
to remove the spray arm, (see Figure 2).
4-14 KitchenAid 2015 Microfiltration Dishwashers
n

Removing Lower Spray Arm

Figure 1
Figure 2
3. Lift off lower spray arm, (see Figure 3).
Lower Spray Arm Reinstallation
1. Place spray arm on the diverter housing and slowly turn
spray arm until it seats on diverter—making sure the
"corner arm" is pointed towards the front right corner of
the tub (see Figure 4).
2. Grasp lower spray arm nut and turn 1/4" clockwise to
secure in place on diverter housing.
3. Run the Diagnostic Cycle to verify spray arm operation.
Soaking Arm
Nut
Figure 3
Scrubbing Arm
Corner Arm
Figure 4