Parts And Their Functions - Panasonic AU-XPD3P Operating Instructions Manual

Parts and their Functions

Power LED
This indicator lights up in green when the device is running.
Power switch
Use this switch to turn the P2 drive ON ( ) and OFF ( ).
Access indicator
Lights green during P2 card access.
When the P2 card is removed from the P2 drive, processing by the driver takes
some time, and the indicator lights orange until the P2 drive is again in a state in
which a P2 card can be inserted.
u NOTE:
• Do not remove a P2 card during access. The file data could be corrupted or
the P2 card could be damaged.
P2 Card slot
Insert a P2 card.
The P2 drive is designed for P2 cards and does not work with other cards.
EJECT button
Press this button to remove a P2 card from the P2 drive.
DC IN 16 V Socket
Connect an AC adaptor to this socket.
Thunderbolt 3 port (USB Type-C)
Use the supplied Thunderbolt 3 cable to connect the P2 drive to the Thunderbolt
3 port on a personal computer.
: This mark shows that the port supports Thunderbolt 3.
FAN
This is the vent for the unit's cooling fan.
The fan operates automatically depending on the operating temperature. Make
sure the vent is not obstructed while operating the unit.
u NOTE:
• If a malfunction occurs with the fan motor, the access indicator will blink slowly
(about 1-second intervals) in red. When a malfunction occurs with the fan
motor, it is not possible to access the P2 card. In addition, if a malfunction
occurs with the fan motor while a P2 card is being accessed, access is
stopped forcefully.
E-10