Related Manuals for Heatmiser PRT-UWTS
Summary of Contents for Heatmiser PRT-UWTS
- Page 1 Heatmiser PRT-UWTS Wireless Touchscreen Programmable Thermostat Ref: PRT-UWTS Rev: 1.0...
-
Page 3: Table Of Contents
Contents Page Installation Procedure Pairing the Thermostat with the UH1-W Temperature Display Setting the Clock Comfort Levels Explained Locking the Thermostat Temperature Override Temperature Hold Holiday Heat On/Off Clean Screen Factory Reset Calibration Recharging the Battery Optional Feature Setup 12-16... -
Page 4: Installation Procedure
Installation Procedure Do’s 1. Do mount the thermostat at eye level, or if using the desk stand, ensure the thermostat is away from any heat sources. Don’ts 1. Do not push hard on the LCD otherwise you will damage the liquid crystal display and this is not repairable. -
Page 5: Pairing The Thermostat With The Uh1-W
Set the board address number on the UH1-W by selecting from 01-09 indicated on the dial. Each UH1-W will need a different address. PRT-UWTS: Press Prog then Setup. ● At the top of the screen press the Up button to select feature 05. -
Page 6: Temperature Display
RF symbol will appear, the assigned zone on the UH1-W should now be active. If the output on the UH1-W does not come on, reduce the distance between the PRT-UWTS and UH1-W and check features 05-07 have been set up properly, then repeat the above process. Temperature Display Room Temp = This is the current room temperature. -
Page 7: Setting The Clock
Setting the Clock To set the clock in your thermostat, follow the steps below; With the thermostat turned on, press PROG ● Press Clock ● Use the Up and Down keys to set the correct time ● Press Day to set the correct day ●... - Page 8 Factory Programmed Comfort Levels The following comfort levels are programmed already, however you can change them easily. Weekday Level Time Temp Wake 07.00 21°C Leave 09.00 16°C Return 16.00 21°C Sleep 22.00 16°C Weekend Level Wake 09.00 21°C Leave 22.00 16°C Return --.--...
-
Page 9: Locking The Thermostat
Changing the Comfort Levels Press PROG and select Wake. ● Use the Up/Down keys to set the time for the 1 Comfort Level. ● Use the Up/Down keys to set the temperature for the 1 ● Comfort Level. You should now repeat for the Leave, Return and Sleep levels. ●... -
Page 10: Temperature Override
Temperature Set Using the Up and Down keys allows you to adjust the set temperature. When you press either of these keys, you will see the word SET and the desired temperature. Press Done to accept. Temperature Hold The temperature hold function is ideal for parties or when you will be going out for a number of hours. -
Page 11: Holiday
Holiday The Holiday function reduces the set temperature in your home to the frost temperature setting. The thermostat will maintain this temperature for the duration of the holiday and will then automatically return to the program mode on your return. Assume you program a holiday on Monday for 1 day, the holiday will start immediately will count the next day (Tuesday) as the holiday. -
Page 12: Heat On/Off
Frost Protect Mode: Pressing the Power button once will place the thermostat in frost protect mode. In this mode, the thermostat will display the frost icon and will only turn the heating on should the room temperature drop below the set frost temperature (see pages 13-14 ) Should the heating be turned on whilst in frost mode, the flame symbol will be displayed. -
Page 13: Factory Reset
Factory Reset Turn off the thermostat by pressing and holding the Power button. Now press and hold the Power button for 10 seconds, you will see all the icons appear for 2 seconds and then disappear. The thermostat has now been reset to the factory defaults. Calibration Should you need to calibrate the thermostat, follow these steps;... -
Page 14: Optional Feature Setup
Feature Setup Feature 01 – Temperature Format: This function allows you to select between °C or °F. Feature 02 – Switching Differential: This function allows you to adjust the switching differential of the thermostat. This is the number of degrees the thermostat will switch on below the set temperature. - Page 15 Feature 04 – Output Delay: To prevent rapid switching, an output delay can be entered. This can be set from 00-15 minutes. The default is 00 which means there is no delay. Feature 05 – UH1-W Address: Within one building, up to 9 UH1-W’s can be used, each must have a unique address.
- Page 16 Feature 09 – Up/Down Temperature Limit This function allows you to limit the use of the up and down temperature keys. This limit is also applicable when the thermostat is locked and so allows you to give others limited control of the heating system.
- Page 17 Adjusting the Feature Settings To adjust the settings, follow these steps; With the thermostat turned on. ● Press Prog ● Press Setup ● Use the Up/Down keys at the top of the screen to select the ● feature number Use the Up/Down keys in the centre of the display to adjust the ●...
- Page 18 Feature Table Feature Description Setting Temperature Format 00=°C 01=°F Switching Differential 0.5 – 03 1°C Default Frost Protect Temperature 07-17°C 12°C Default Output Delay 00-15 Minutes 00=Default UH1-W Address 01-09 UH1-W Zone No. 01-08 UFH or Radiator 00=UFH 01=Radiator Fail Safe 00=Disabled 01=Enabled User Temp Limit...
- Page 20 Support Tel: 0845 467 2372...
Need help?
Do you have a question about the PRT-UWTS and is the answer not in the manual?
Questions and answers