Setting Up The 3Com Tftp Server; Downloading Firmware Updates - 3Com Baseline 2226-PWR Plus User Manual

48 C 5: U
HAPTER PGRADING THE
Read the license agreement, and then click Yes to
4
agree. The Choose Destination Location screen
appears.
To install the 3Com TFTP Server to the default folder,
5
click Next.
To specify another location, click Browse, and then
select a new location. Click OK, and then click Next.
Setup installs the 3Com TFTP Server on the computer.
When installation is complete, the Setup Complete
page appears.
Click Finish to exit the setup wizard.
6

Setting Up the 3Com TFTP Server

Before you can upgrade the firmware, you first need
to set up the upload/download directory on the
3Com TFTP Server. The Switch will fetch the firmware
upgrade files from this directory.
To set up the upload/download directory:
Start the 3Com TFTP Server by clicking the shortcut
1
on the program folder.
The 3Com TFTP Server interface appears.
On the Options menu, click Options.
2
The Options screen appears.
In Upload/download directory, type the full path to
3
the directory where you intend to copy the firmware
updates. For example, you can type
the example in Figure
Alternatively, click Browse Directories, and then select
a folder from the directory tree.
F
IRMWARE
(as in
C:\TFTP\
26).
Figure 26 Options Screen
Click OK.
4

Downloading Firmware Updates

You can periodically check the 3Com Web site
(www.3Com.com) for firmware updates to the
Switch.
To check for and download available firmware
updates:
Start your Web browser, and then enter
1
in the Address or Location bar.
www.3com.com
Click Support & Downloads, and then click Down-
2
loads & Drivers. The Search for Downloads page
appears.
In Enter a Product Number, enter
3
click Quick Search. 3C16490 is the product number
for 3Com Baseline Switch 2226-PWR Plus.
The Download Search Results page displays any avail-
able download for the Switch.
, and then
3C16490