Faults - Winterhalter Gastronom GS 640 Operating Instructions Manual

 )DXOWV
'LVSOD\ )DXOW
Utensil washer
does not start up
Wash pro-
gramme does not
start
Items are not
clean
Numbers 1, 11 or
12
Numbers 5, 13,
15
Numbers 2, 3, 4,
6, 7, 8, 9, 10
16
If the symbol for a fault lights up, the utensil washer must be switched off (press
On/Off switch).
Following this, the (UU sign lights up with the fault code.
For information on faults, see following table.
&DXVH(IIHFW
Customer's main switch is
not switched on
Door is not completely
closed
Too low dosage of detergent
or detergent container
empty
Basket filter and/or flat filter
blocked
Wash jets in the wash arms
blocked
Functional fault in the water
treatment
Utensil washer
switches off completely
Utensil washing cannot be
switched on again
Main water stop valve
closed
Utensil washer not com-
pletely ready for operation
Utensil washer not com-
pletely ready for operation
5HPHG\
Switch on customer's main
switch
Close door completely.
Fill up detergent container or
add detergent powder
Clean basket filter and flat filter
Clean wash jets
Call Winterhalter service engi-
neer
Call Winterhalter service engi-
neer
Open main water stop valve
Call Winterhalter service engi-
neer
Call Winterhalter service engi-
neer
89007105