Page 1
Connected Latching Relay 4 121 70 Requires the installation of a : Connected Starter Pack Gateway module "... with Netatmo" Composition Control wiring authorized EN 60669-2-1 Self-protected Line OUT ON/OFF Load Connected Latching Relay oooooooooooooooo oooooooooooooooo ooooooooooo oooooooooooooo ooooooooooo ooooooooooooooo...
Page 2
C1, C2: Preparation, connection 2x 1.5mm² 2.5mm² N, L, Load: 2x 2.5mm² Turn off the power 6mm² at general circuit breaker C1,C2, N, L, Load: MIN : 0.8Nm 4 mm MAX : 1.4Nm Wiring examples Do not use a switch (with dimmer option) connected to control a Connected Latching Relay.
Page 3
All devices LED go OFF. <1s <1s Finalize the installation in the Legrand Home + Control app To add this connected product and peripheral items in your connected installation, you must follow the instructions: - with Legrand Home + Control app...
Page 4
Use by manual control and status LED ON/OFF Mode www.legrand.fr/reference/412170 LEGRAND - Pro and Consumer Service - BP 30076 87002 LIMOGES CEDEX FRANCE • www.legrand.com EU SIMPLIFIED DECLARATION OF CONFORMITY The undersigned, Legrand declares that the radio equipment listed on this instruction sheet are compliant to the directive 2014/53/UE.
Need help?
Do you have a question about the 4 121 70 and is the answer not in the manual?
Questions and answers